LaCie FireWire 400 PCI Card • DESIGN BY SISMO
User Manual
Table of Contents
page 1
Table of Contents
1.Introduction.............................................................................................................. 4
2.2. View of the Card.......................................................................................................................... 6
LaCie FireWire 400 PCI Card • DESIGN BY SISMO
User Manual
Foreword
page 3
This symbol on the product
or on its packaging indicates
that this product must not be
disposed of with your other
household waste. Instead, it
designed collection point for the recycling
the environment. For more information
about where you can drop off your waste
equipment for recycling, please contact
your local city office, your household waste
disposal service, or the shop where you
purchased the product.
of waste electrical and electronic equip-
ment. The separate collection and recy-
cling of your waste equipment at the time
of disposal will help to conserve natural
resources and ensure that it is recycled in a
manner that protects human health and
is your responsibility to dispose of your
waste equipment by handing it over to a
Health and Safety Precautions
✦ Only qualified persons are authorized
to carry out maintenance on this de-
vice.
taining liquids on the PCI card, as
they may spill onto its circuitry. Do-
ing so increases the risk of electrical
shock, short-circuiting, fire or per-
sonal injury.
IMPORTANT INFO: Any loss, corrup-
tion or destruction of data while using a
LaCie drive is the sole responsibility of
the user, and under no circumstances
will LaCie be held liable for the recovery
or restoration of this data. To help pre-
vent the loss of your data, LaCie highly
recommends that you keep TWO copies
of your data; one copy on your external
hard drive, for instance, and a second
copy either on your internal hard drive,
another external hard drive or some other
form of removable storage media. LaCie
offers a complete line of CD and DVD
drives. If you would like more information
on backup, please refer to our Web site.
✦ Read this User Manual carefully, and
follow the correct procedure when
setting up the device.
✦ Make sure that the computer and PCI
card are electrically grounded. If the
devices are not grounded, there is an
increased risk of electrical shock.
✦ Do not attempt to disassemble or
modify your PCI card. Never insert
any metallic object into the circuitry
to avoid any risk of electrical shock,
fire, short-circuiting or dangerous
emissions. Your PCI card contains no
user-serviceable parts. If it appears to
be malfunctioning, have it inspected
by a qualified LaCie Technical Sup-
port representative.
✦ Do not expose the PCI card to tem-
peratures outside the range of 5° C
to 45° C (41° F to 104° F). Doing so
may damage the card or disfigure
its casing. Avoid placing your card
near a source of heat or exposing it
to sunlight (even through a window).
Inversely, placing your card in an en-
vironment that is too cold or humid
may damage the unit.
✦ Never expose your device to rain, or
use it near water, or in damp or wet
conditions. Never place objects con-
LaCie FireWire 400 PCI Card • DESIGN BY SISMO
User Manual
Introduction
page 4
1. Introduction
Thank you for your purchase of your new LaCie FireWire 400
PCI Card! This FireWire IEEE 1394a PCI Host Controller card
uses the most advanced, high-speed digital technology, low-cost
and high bandwidth realtime (isochronous) data interfacing be-
tween computers, computer peripherals and consumer electron-
ics products such as camcorders, VCRs, printer, TVs, and digital
cameras.
Your LaCie PCI Card Capabilities
✦ IEEE 1394a compliant
✦ Three external FireWire ports, one internal FireWire
400 port
✦ Transfer files at up to 400MBits/sec
✦ Digital video capture capabilities
✦ Plug & Play convenience
✦ No drivers required
Now when you connect your FireWire 400 devices through your
LaCie FireWire 400 PCI Card, you will be able to achieve the
impressive new transfer rates that FireWire 400 makes possible.
✦ Anti-static handle
FireWire is also a point-to-point interface, meaning that a
FireWire device can transmit data to another FireWire device
without having to go through a computer. This lets several com-
puters share a given device, and also allows up to 63 devices
to be daisy-chained to the same FireWire bus (with a max of 16
devices on one branch).
Quick Links
Click a topic:
LaCie FireWire 400 PCI Card • DESIGN BY SISMO
User Manual
Your LaCie FireWire 400 PCI Card
page 5
2. Your LaCie FireWire 400 PCI Card
1.1. Minimum System
Requirements
The LaCie FireWire 400 PCI Card is compliant with the Open
Host Controller Interface (OHCI), the Enhanced Host Controller
Interface (EHCI) and the USB Revision 2.0 specifications.
Windows
IMPORTANT INFO: The format of this card is not compat-
ible with PCI express slots, laptops or notebook computers, and
therefore cannot be installed on these types of systems.
✦ Windows 2000, Windows XP, Windows Server 2003,
or Windows Vista
✦ One PCI slot that complies with PCI Specification Rev.
2.3 or above
CAUTION: Before handling and installing your LaCie FireWire
400 PCI Card, ensure that you have properly grounded your-
self. Electrostatic Discharge (ESD) can quickly and easily dam-
age or destroy your component or your computer. Please see
properly ground yourself.
✦ Pentium III or higher compatible processor
✦ 128MB RAM
Mac
IMPORTANT INFO: During installation or removal, always
hold your card by the anti-static gripping pad.
✦ Mac OS 10.1.5 or higher
✦ One PCI slot that complies with PCI Specification Rev.
2.3 or above
✦ G3 (Blue & White), G4, G5, or Intel processor
✦ 128MB RAM
LaCie FireWire 400 PCI Card • DESIGN BY SISMO
User Manual
Your LaCie FireWire 400 PCI Card
page 6
2.1. Package Content
1. LaCie FireWire 400 PCI Card, Design by Sismo
2. Quick Install Guide
2.2. View of the Card
1. Three FireWire 400 Ports – These ports are where you
attach the FireWire 400 interface cables.
3. LaCie FireWire 400 PCI Card Utilities CD-ROM (includes
User Manual)
FireW ire 400 PCI Card
User Manuals
re
LaCie FireWire 400 PCI Card • DESIGN BY SISMO
User Manual
Installing Your LaCie PCI Card
page 7
3. Installing Your LaCie PCI Card
3.1. Electrostatic Discharge (ESD)
IMPORTANT INFO: During installation or removal, always
hold your card by the anti-static gripping pad.
Static electricity is an electric charge caused by an imbalance of
electrons on the surface of a material. When you touch an object
and are shocked, this is the transfer of the static charge or the
balancing of your charge to that of the object. This exchange is
called Electrostatic Discharge or ESD.
ESD can cause two different types of damage to computers and
peripherals: (1) Catastrophic, which is the complete loss of de-
vice functionality, and (2) Latent Defect, where the device is only
partially effected, and the device loses part of its productivity and
longevity.
Because we cannot eliminate the generation of static electricity,
it is extremely important to follow the proper steps to ground
yourself before handling your LaCie FireWire 400 PCI Card or
touching any internal component of your computer. This can be
accomplished by proper grounding in conjunction with the use
of ESD safe mats, wrist or shoe straps. Consult your computer
supply specialist for more details on the correct ESD dissipative
device to fit your needs.
LaCie FireWire 400 PCI Card • DESIGN BY SISMO
User Manual
Installing Your LaCie PCI Card
page 8
3.2. Inserting Your LaCie PCI Card
Bracket
LaCie PCI Card
Required Tools
System frame
✦ Philips-head and/or flat-head screw driver
✦ Computer System Manual
1. Turn off your computer and disconnect all external periph-
eral devices and cables, i.e. power cord, modem/fax line,
monitor, etc.
2. Remove your computer’s cover. For most computers, several
screws will need to be unseated before you can remove the
computer’s cover. These screws are usually located at the
rear of the computer, along the edge of the cover. However,
placement of these screws and cover attachment may vary by
manufacturer, so please refer to your computer’s manual for
specific details.
3. Once you have removed the cover, you will need to locate
the PCI slots on the motherboard. The PCI slots are generally
located in the back of the computer, with the slots built into
the side-wall of the computer (please refer to your computer
system’s manual for the exact location of your PCI slots – the
LaCie PCI Card may be installed in either a 32 or 64-bit PCI
card slot). If necessary, you may need to remove the expan-
sion slot cover, and you may also need to remove any add-in
boards which block access to the PCI slots.
PCI or PCI-X slot
Motherboard
4. Take the LaCie PCI Card out of its anti-static blister package
and, being careful to touch only the anti-static gripping pad,
push the card into the empty PCI card slot. There is only way
to mount the card, so if you are having problems inserting
the card into the PCI slot, make sure that it is oriented cor-
rectly. Be sure that the gold contact pins of the PCI card are
seated completely inside your computer’s PCI slot. Be aware
that it may take some force to get the card fully seated in
the slot.
5. Once the PCI card is seated correctly, tighten with a screw.
6. If necessary, replace any add-in boards that you removed
in Step 3.
7. Now you are ready to put the computer’s cover back on
and reconnect all of your external peripheral devices and
cables.
8. Power on your computer. After the start up procedure has
finished, you should be able to connect devices through the
available FireWire ports.
LaCie FireWire 400 PCI Card • DESIGN BY SISMO
User Manual
Installing Your LaCie PCI Card
page 9
3.3. Driver Installation
Windows Users
There are no drivers to install for Windows 2000, 2003
Server, XP, and Vista. The LaCie FireWire PCI Card has
the drivers built into the BIOS for these operating sys-
tems.
Mac Users
There are no drivers to install. The LaCie FireWire PCI
Card has the drivers built into the BIOS for the Mac OS.
LaCie FireWire 400 PCI Card • DESIGN BY SISMO
User Manual
FireWire 400 Questions & Answers
page 10
4. FireWire 400 Questions & Answers
What is FireWire/IEEE 1394?
FireWire Cables and Connectors
A serial bus used to connect external computer and consumer
electronic devices to computers and consumer electronic con-
soles.
There are three different types of FireWire cables on the market:
6-to-6-pin, 6-to4-pin and 4-to-4-pin. LaCie FireWire devices
are shipped with a certified 6- to-6-pin FireWire cable. Most
FireWire-equipped laptop computers feature a 4-pin FireWire
connector, so in order to connect your LaCie drive to a laptop
with a 4-pin FireWire port, you will need to purchase a LaCie
certified 6-to-4-pin FireWire cable (sold separately).
What does IEEE 1394 mean?
“1394” is an abbreviation of IEEE 1394, the name given to this
high-performance serial bus. IEEE (the Institute of Electrical and
Electronic Engineers) is the name of the engineering corps that
developed this standard. The 1394 refers to the 1,394th stanard
that the IEEE has produced.
If your computer does not have a FireWire port, or only has
a 4-pin port, consult your LaCie reseller or La- Cie Customer
Support for information about adding a LaCie FireWire PCI or
PCMCIA card.
What is the relationship between IEEE 1394,
FireWire, iLink and DV?
These four names all refer to the same interface:
IEEE 1394 - the name of the standard, used in the computer
industry.
FireWire - the brand name used by Apple.
iLink - the brand name used by Sony.
DV - logo used by video camcorder manufacturers.
What can the FireWire interface be used for?
With its high data transfer rates, FireWire is a great interface for
consumer electronics, like CD and DVD recorders, external hard
drives and video devices, such as digital camcorders, because it
has an extremely large bandwidth and supports two types of data
transfer (anyschronus and isochronous) which help to guarantee
the transfer of time-critical data.
FireWire is also a point-to-point interface, meaning that a
FireWire device can transmit data to another FireWire device
without having to go through a computer. This lets several com-
puters share a given device, and also allows up to 63 devices to
be daisy-chained to the same FireWire bus (with a max of 16 de-
vices on one branch). To daisy-chain, connect your one FireWire
drive directly to the computer, then connect another FireWire
drive to the first FireWire drive, then another until you reach 16.
Then do the same on the rest of the ports on the FireWire bus.
LaCie FireWire 400 PCI Card • DESIGN BY SISMO
User Manual
Contacting Customer Support
page 11
5. Contacting Customer Support
Before You Contact Technical Support
✦ Read the manual.
✦ Try to isolate the problem.
If you still can’t get your LaCie PCI Card to work properly, con-
tact us via the provided Web link. Before contacting us, make
sure that you are in front of your computer and that you have the
following information on hand:
✦ Your card’s serial number
✦ Computer brand and model
✦ Operating system and version
✦ Amount of memory installed
✦ Names of CD or DVD drives installed on your computer
✦ Names of any other devices installed on your computer
LaCie FireWire 400 PCI Card • DESIGN BY SISMO
User Manual
Contacting Customer Support
page 12
5.1. LaCie Technical Support Contacts
LaCie Asia, Singapore, and Hong Kong
Contact us at:
LaCie Australia
Contact us at:
LaCie Belgium
LaCie Canada
Contact us at:
Contact us at:
http://www.lacie.com/be/contact/ (Français)
http://www.lacie.com/caen/contact/ (English)
LaCie Denmark
LaCie Finland
Contact us at:
Contact us at:
LaCie France
LaCie Germany
Contact us at:
Contact us at:
LaCie Italy
LaCie Japan
Contact us at:
Contact us at:
LaCie Netherlands
LaCie Norway
Contact us at:
Contact us at:
LaCie Spain
LaCie Sweden
Contact us at:
Contact us at:
LaCie Switzerland
Contact us at:
LaCie United Kingdom
Contact us at:
http://www.lacie.com/chfr/contact/ (Français)
LaCie Ireland
LaCie USA
Contact us at:
Contact us at:
LaCie International
Contact us at:
LaCie FireWire 400 PCI Card • DESIGN BY SISMO
User Manual
Warranty Information
page 13
6. Warranty Information
LaCie warrants your PCI card against any defect in material and
workmanship, under normal use, for the period designated on
your warranty certificate. In the event this product is found to be
defective within the warranty period, LaCie will, at its option,
repair or replace the defective PCI card.
This warranty is void if:
✦ The card was operated/stored in abnormal use or mainte-
nance conditions;
✦ The card is repaired, modified or altered, unless such re-
pair, modification or alteration is expressly authorized in
writing by LaCie;
✦ The card was subjected to abuse, neglect, lightning strike,
electrical fault, improper packaging or accident;
✦ The card was installed improperly;
✦ The serial number of the card is defaced or missing;
LaCie will not, under any circumstances, be liable for direct, spe-
cial or consequential damages such as, but not limited to, dam-
age or loss of property or equipment, loss of profits or revenues,
cost of replacement goods, or expense or inconvenience caused
by service interruptions. Under no circumstances will any person
be entitled to any sum greater than the purchase price paid for
the card.
To obtain warranty service, call LaCie Technical Support. You
may be asked to furnish proof of purchase to confirm that the
card is still under warranty. All cards returned to LaCie must be
securely packaged in their original box and shipped with post-
age prepaid. Register online for free technical support:
|