Scientific Atlanta AT8450 User Manual

AT8450Rev A AllTouch®  
Remote Control  
User’s Guide  
If you program codes to control devices,  
record your codes here:  
CBL: ______________________  
TV: _______________________  
DVD: _____________________  
AUX: _____________________  
Welcome to the Ultimate Control Experience!  
Your newAT8450AllTouch® Universal Remote Control (remote) is a true universal remote,  
functioning as four remotes in one. As one example, you can use this remote to operate  
your TV, VCR or DVD player, cable box, and audio receiver.  
How Does A Universal Remote Control Work?  
You tell the remote which type of device you want to operate using the four keys arched  
across the top of the remote. These keys, known as mode keys, are labeled CBL, TV, DVD,  
and AUX. Each mode key is associated with a specific device.As an example, if you want  
the remote to operate your TV, you simply press the TV key. Other keys you press on the  
remote thereafter should operate your TV. Want to switch the remote to operate a different  
device? Just press the mode key for the next device you want to operate. In this guide, you  
will learn which types of devices you can control and how to program the remote to control  
your specific devices.  
Note: Some remote keys may not operate in all modes. You can even program your remote  
to assign specific functions, such as channel control, to operate one device only. You will  
learn more about these advanced functions later in this guide.  
Where Do I Start?  
Before you begin programming your remote, complete the following initial setup tasks.  
Install the Batteries  
The remote requires two AA batteries (alkaline recommended). A diagram in the battery  
compartment of the remote indicates proper placement of the batteries. When batteries are  
properly installed, the light on the remote blinks each time a key is pressed.  
Visit the Quick Reference  
Timing is often important when you program advanced features. Therefore, knowing where  
certain keys are on the remote gives you an edge in pressing the right key at the right time.  
Find a Place to Store Your Remote  
Keeping up with one remote is much easier than keeping up with four remotes. However, it  
is still a good idea to find a storage location for your remote. The AT8450 AllTouch Remote  
Control is not a toy. It should be kept out of the reach of children under the age of 6 years.  
Important Information About Power Control  
Scientific-Atlanta strongly recommends that you turn off your cable box every time you  
turn off your TV. To make this easier, you can program your remote to turn both devices  
on or off at the same time. After you program the remote to control your favorite  
entertainment devices, see Change Power Control to learn more about programming  
your remote to control power for the TV and cable box at the same time.  
3
Quick Reference  
T11281  
Device Control  
Sound Control  
Powers on or off  
Adjusts volume  
Mutes sound  
Controls AUX functions  
Controls DVD functions  
Controls TV functions  
Controls Cable functions  
4
Viewing and Browsing Control  
DVR Control  
Replays the previous few  
Displays the program guide  
seconds of a program  
Displays the Applications  
Menu  
Displays a list of programs  
that you have recorded, so  
that you can select one for  
viewing  
Displays channel and  
program information  
Navigates through the  
program guide by days  
Displays live television  
programming  
Moves through selections  
Selects and deselects  
screen item  
Navigates through settings or  
the program guide  
Displays the General  
Settings or Quick settings  
menus  
Exits settings, menus, and  
guides  
PIP (Picture-In-Picture) Control  
Selects options in menus  
and the program guide  
Opens or closes the PIP  
window  
Selects channel, up or down  
Views favorite channels  
Swaps the contents of the  
PIP window and the main  
viewing screen so that the  
PIP window displays on  
the main screen  
Returns to last channel  
viewed  
Moves the PIP window  
to another location on  
the screen  
Numeric Keys  
Enters channel numbers  
and remote codes (also  
enters your parental  
control PIN)  
Selects the channels in the  
PIP window, up or down  
Video Source  
Reserved for future use  
Reserved for future use  
5
What Devices Can I Control?  
The mode keys arched across the top of the remote tell the remote which device you  
want to operate.  
Each mode key is associated with different groups  
of devices. You can use each mode key to control  
one of its associated devices:  
Mode Key Associated Devices  
T11282  
CBL .......... cable boxes, HDTV tuners, and satellite receivers  
TV ............. TVs and HDTVs  
DVD .......... DVD players, VCRs, digital video recorders (DVRs), and CD players  
AUX .......... receivers, tuners, and Home Theater in a Box (HTIB)  
What Devices Do I Want to Control?  
Record the devices (including brand) you want to control here:  
1_____________________________ 3_____________________________  
2_____________________________ 4_____________________________  
Does each mode key relate to only one of your devices? If yes, go to Program the  
Remote to Control My Devices. Otherwise, reassign the mode keys to match your  
combination of devices.  
Reassign Mode Keys  
If you are a big movie fan, you may want to control two video recording devices. Perhaps  
you have a DVD player and a VCR, or a VCR/DVD combination device. How can you  
control both the VCR and the DVD player when you only have one DVD key? With the  
AT8450, you can reassign a mode key to operate in a different mode. For example, you  
can reassign the AUX key to operate the VCR in DVD mode. Then, you can program the  
DVD key to control your DVD player. You can reassign theAUX key, the DVD key, or  
both. The TV key and the CBL key cannot be reassigned.  
Reassigning Mode Keys  
(Program Code 9 9 2)  
1. Press and hold SELECT and CBL until all mode keys blink twice.  
2. Press 9 9 2. The CBL mode key blinks twice.  
3. Press the mode key associated with the type of device you want to control, and then  
press the mode key that you want to change. All mode keys blink three times.  
Some Common Examples  
• To program theAUX key to operate in DVD mode, press DVD and then AUX.  
• To program the DVD key to operate in TV mode, press TV and then DVD.  
4. When finished, go to Program the Remote to Control My Devices.  
6
Program the Remote to Control My Devices  
Try to use your remote to control your devices. If the remote does not work for a device,  
you can assign a different device code to the appropriate mode key. If the remote provides  
only limited functionality for a device, you can look for a code that provides more function-  
ality. Before you begin, make sure you know the brand name of the device you want to  
control.  
Note: Some remote keys may be assigned to operate one device type only. For example,  
volume control may be assigned to the TV only. If this is the case, you can reprogram  
power, volume, and channel control using procedures later in this guide.  
Assigning a Different Device Code to a Mode Key  
1. Find the codes for your brand of device in the appropriate setup code list at the end  
of this guide. For example, look under TV Group if you need to program the remote  
to operate your TV.  
2. Turn on your device.  
3. Press and hold SELECT and the appropriate mode key until all of the mode keys  
blink twice. For example, to set up the TV, press and hold SELECT and TV.  
Note: If you reassigned mode keys, you may, for example, press SELECT and DVD  
to program the DVD mode key with a TV code.  
4. Enter the first setup code for the device. All mode keys blink twice to indicate that  
the code entry was accepted.  
5. Point the remote at the device, and press POWER,  
, or  
to test the device.  
6. Did the device operate correctly?  
• If yes, write down the code that worked on the cover of this guide.  
You may need it again if the device code is accidentally erased.  
• If no, repeat these steps using a different setup code.  
Note: If none of the codes listed for your brand of device operate the device  
correctly, go to What If None of the Codes Work for instructions.  
7. Repeat this procedure for each mode key you want to program.  
7
What If None of the Codes Work?  
If none of the codes listed for your brand of device operate the device correctly, you can  
search through the code library for a valid code.  
Improving Your Reaction Time  
When you search the code library, you need to be ready to press SELECT as soon as the  
remote turns off your device. Therefore, make sure you are familiar with the location of the  
SELECT key before you begin this procedure.  
Sizing Up The Libraries  
The mode keys blink twice when the remote reaches the last code in a library. You  
do not need to count codes. However, knowing the size of each library will help you  
determine how long it will take to cycle through all of the codes in the library. Each  
library contains the following number of codes:  
CBL mode: 22  
• TV mode: 219  
• AUX mode: 37  
DVD mode: 206  
Searching the Code Library  
(Program Code 9 9 1)  
1. Turn on the device.  
2. Press and hold SELECT and the appropriate mode key (CBL, TV, DVD, orAUX) until  
the mode keys blink twice. For example, to search for a TV code, press and hold  
SELECT and TV at the same time.  
Note: If you reassigned mode keys, you may, for example, press SELECT and  
DVD to search for a TV code to assign to the DVD mode key.  
3. Press 9 9 1. The mode key you selected in step 2 blinks twice.  
4. Point the remote toward the device, and press  
. The remote automatically tests  
each code in its library, beginning with the most common codes. The mode key  
blinks once each time the remote transmits a new code. The mode key blinks twice  
when it reaches the last code.  
5. As soon as the device powers off, press SELECT.  
6. Verify the new code is correct by pressing POWER.  
7. Did the device power on again?  
• If yes, press SELECT to assign the code.  
• If no, complete the following steps:  
a) Turn the device on.  
b) Press  
or  
to step forward or back to the correct code.  
c) When the device turns off, press SELECT to assign the code.  
8. Go to Which Code Worked to identify the code that controls your device. After you  
identify the code, record the code in the space provided on the cover of this guide.  
8
Which Code Worked?  
Find out which code programmed the mode key to control your device.  
Finding the Code That Worked  
(Program Code 9 9 0)  
1. Press and hold SELECT and the appropriate mode key (CBL, TV, DVD, orAUX) until  
all mode keys blink twice.  
2. Press 9 9 0. The mode key you selected in step 1 blinks twice.  
3. Press 1; then, count the number of times the mode key blinks. The number of blinks  
indicates the first digit in the code. For example, 4 blinks indicates the first digit in  
the code is 4. If the mode key does not blink, the digit is 0.  
4. Press 2; then, count the number of times the mode key blinks. This number indicates  
the second number in the code.  
5. Press 3; then, count the number of times the mode key blinks. This number indicates  
the third number in the code.  
6. Press 4; then, count the number of times the mode key blinks. This number indicates  
the fourth number in the code.  
Note: After all four numbers in the code are identified, all mode keys blink three times.  
7. Record the code in the space provided on the cover of this guide. You may need it  
again if the device code is accidentally erased.  
9
Change Power Control  
Your remote was originally programmed in one of the following ways:  
The remote controls power for only one device at a time. For example, in CBL mode  
the POWER key controls the cable box only. However, in TV mode, the POWER key  
controls the TV only.  
The remote controls power for either one device or for multiple devices at once,  
based on the selected mode. For example, in CBL mode, the POWER key controls  
both the cable box and the TV at the same time.  
Before you change how power control works, try your remote to see how the power control  
currently works. When trying out your remote, keep in mind that the remote provides a  
temporary override for power control. For example, if you press the TV key and then the  
POWER key within 3 seconds, the remote turns on the TV only, regardless  
of the programmed power settings. To see how the remote is originally programmed,  
wait at least 5 seconds before pressing the POWER key after you press any mode key.  
Does your remote already control power for your cable box and TV at the same time?  
If not, Scientific-Atlanta strongly recommends that you program the remote to turn off  
the cable box each time you turn off your TV. Turning off the cable box is especially  
important for high-end cable boxes that contain hard drives for recording and storing  
TV programs and movies. Not only will you reduce wear and tear from the hard disk  
spinning constantly, but you’ll also conserve electricity. As long as the cable box remains  
plugged in, the cable box will receive programming updates, and, if applicable, record  
programs and movies.  
Controlling Power for Multiple Devices at Once  
(Program Code 9 9 8)  
1. Press and hold SELECT and CBL until all mode keys blink twice.  
2. Press 9 9 8. The CBL key blinks twice.  
3. Press the mode key for the first device in the group of devices you want to power on  
and off at once. The CBL key blinks twice.  
4. Press the mode key for the second device in your power group. The CBL key blinks  
twice.  
5. If you want the remote to control power for multiple devices at once, press the mode  
keys for the next devices you want to add to the power group. The CBL key blinks  
twice after each mode key is pressed.  
6. Press SELECT to save your power settings. All mode keys blink three times.  
10  
Want An Example?  
If you want to control power for the TV and the cable box at the same time, you would do  
the following.  
1. Press and hold SELECT and CBL until all mode keys blink twice.  
2. Press 9 9 8. The CBL key blinks twice.  
3. Press TV. The CBL key blinks twice.  
4. Press CBL. The CBL key blinks twice.  
5. Press SELECT.All mode keys blink three times.  
In this example, the remote will function in the following ways:  
When you are in TV mode or CBL mode, the POWER key controls both the cable  
box and the TV.  
When you are in DVD mode, the POWER key controls the DVD device only.  
When you are in AUX mode, the POWER key controls the auxiliary device only.  
Controlling Power for One Device at a Time  
(Program Code 9 9 8)  
1. Press and hold SELECT and CBL until all mode keys blink twice.  
2. Press 9 9 8. The CBL key blinks twice.  
3. Press SELECT to save your power settings. All mode keys blink three times.  
After you select a mode, the POWER key controls the device assigned to that mode.  
For example, in TV mode, the remote controls power for the TV only.  
Important Power Tips  
Scientific-Atlanta strongly recommends that you program the remote to turn off the  
cable box each time you turn off your TV.  
When you “turn off” the cable box using the remote control, you are actually putting  
the box in a power saving mode. As long as the cable box remains plugged in, it will  
continue to receive programming updates and, if applicable, record programs and  
movies.  
If your POWER key controls multiple devices at once, the remote returns to the CBL  
mode after the devices are powered on or off.  
If your POWER key controls multiple devices at once, you can override this setting  
by pressing the desired mode key and then pressing POWER within 3 seconds. For  
example, if you press the DVD key and then the POWER key within 3 seconds, the  
remote turns just the DVD on or off, regardless of the programmed power settings.  
11  
Change Volume Control  
Your remote was originally programmed in one of the following ways:  
The remote controls volume for one device, such as your TV, whether the remote is  
in TV, DVD, or CBL mode. TheAUX mode always retains separate volume control.  
The remote controls volume for different devices, depending on the mode key you  
press. For example, in CBL mode, the volume keys control the cable box. However,  
in TV mode, the volume keys control the TV.  
Try your remote to see how the volume control currently works. The volume keys  
include , and MUTE. If you want to change the volume control, complete the  
,
procedure that fits your needs.  
Controlling Volume for One Device  
(Program Code 9 9 3)  
Note: If you want to assign volume control to a Scientific-Atlanta cable box, complete  
the following prerequisite steps. Press SETTINGS to access the General Settings  
on-screen menu. Then, verify that the Audio: Volume Control setting is set to Variable.  
1. Press and hold SELECT and CBL until all mode keys blink twice.  
2. Press 9 9 3. The CBL key blinks twice.  
3. Press the mode key for the device the volume keys should control. For example, if  
you want to control volume through your TV, press TV. All mode keys blink  
three times.  
Notes:  
The volume keys control only one device whether you are in CBL, TV, or DVD mode.  
In AUX mode, the remote always controls volume for the device assigned to  
the AUX key.  
Controlling Volume for Different Devices  
(Program Code 9 9 3)  
1. Press and hold SELECT and CBL until all mode keys blink twice.  
2. Press 9 9 3. The CBL key blinks twice.  
3. Press SELECT. All mode keys blink three times.  
Result: After you select a mode, the volume keys control the device assigned to that  
mode. For example, in TV mode, the volume keys control volume for the TV only.  
12  
Change Channel Control  
Your remote was originally programmed in one of the following ways:  
The remote controls channels for a single device, such as the cable box, whether the  
remote is in CBL, DVD, or TV mode. TheAUX mode always retains separate channel  
control.  
The remote controls channels for different devices, depending on the mode key you  
press.  
Try your remote to see how the channel control currently works. The channel keys  
include , Digits 0-9, LAST, and FAV. If you want to change the channel control,  
,
complete the procedure that fits your needs.  
Tip: Consider programming the remote to control channels for just the cable box to ensure  
you do not accidentally tune off the proper channel for the TV (usually channel 3 or 4).  
Controlling Channels For One Device  
(Program Code 9 9 7)  
1. Press and hold SELECT and CBL until all mode keys blink twice.  
2. Press 9 9 7. The CBL key blinks twice.  
3. Press the mode key associated with the device you want the channel keys to control.  
For example, if you want to assign channel control to your TV only, press TV. All  
mode keys blink three times.  
Notes:  
The channel keys now always control the device associated with the mode you selected  
in this step, whether in TV, CBL, or DVD mode.  
In AUX mode, the remote always controls channels for the device assigned to the AUX  
key.  
Controlling Channels For Different Devices  
(Program Code 9 9 7)  
1. Press and hold SELECT and CBL until all mode keys blink twice.  
2. Press 9 9 7. The CBL key blinks twice.  
3. Press SELECT. All mode keys blink three times.  
Result: The channel keys now control the device associated with the mode key you select.  
For example, in TV mode, the channel keys control the TV, but in CBL mode, the channel  
keys control the cable box.  
13  
Change VCR/VOD Programming  
Your remote was originally programmed in one of the following ways:  
The Rewind, Play, Fast Forward, Stop, Pause, and Record keys are known as transport  
keys. These keys are programmed, by default, to transmit the codes for the Explorer®  
8000series Home Entertainment Server video-on-demand (VOD) or digital video  
recorder (DVR) functions when in CBL mode.  
The transport keys control different devices, depending on the mode key you press.  
You can choose to override the default settings for the transport keys so that the transport  
keys operate a different device when you have selected Cable (CBL) mode.  
Try your remote to see how the transport keys currently work. If you want to change the  
settings for the transport keys, complete the procedure that fits your needs.  
Changing VCR/VOD Programming  
(Program Code 9 9 9)  
1. Press and hold CBL and SELECT until all mode keys blink twice.  
2. Press 9 9 9. The CBL key blinks twice.  
3. Press the DVD mode key associated with the device you want the transport  
keys to now control. All mode keys blink three times.  
Results:  
The transport keys now always control the device associated with the mode you  
selected in this step (DVD).  
Pressing Play starts the VCR, the DVD, or the device that has been reassigned to AUX.  
In AUX mode, the remote always controls channels for the device assigned to the AUX  
key.  
Restoring Default VCR/VOD Settings  
(Program Code 9 9 9)  
1. Press and hold CBL and SELECT until all mode keys blink twice.  
2. Press 9 9 9. The CBL key blinks twice.  
3. Press CBL.All mode keys blink three times.  
Result: The transport keys are restored to their default settings.  
Example: Pressing Play in CBL mode starts the DVR.  
14  
Put It Back the Way I Got It  
Return specific advanced functions or all advanced functions back to their original  
settings. Choose the procedure that fits your needs.  
Important: Your cable service provider may have programmed the dual power control  
feature for your convenience. Therefore, if you reset the power control, you may need  
to program the remote to control the power for the cable box and TV at the same time.  
Resetting Mode Keys (Program Code 9 9 2)  
You can reprogram the DVD key and the AUX key to operate in their original modes.  
1. Press and hold CBL and SELECT until all mode keys blink twice.  
2. Press 9 9 2. The CBL key blinks twice.  
3. Do one of the following:  
• If you are returning the DVD key to its original state, press DVD twice.  
• If you are returning the AUX key to its original state, press AUX twice.  
All mode keys blink three times.  
4. Repeat this procedure if you want to return both keys to their original modes.  
Resetting Device Codes and Mode Keys (Program Code 9 7 7)  
Follow this procedure to return programmed device codes and mode keys to their original  
settings. This procedure erases device codes you programmed. In addition, this proce-  
dure returns all reassigned mode keys to their original operation.  
This reset procedure does not reset any changes you made to power, volume, or channel  
control.  
1. Press and hold SELECT and CBL until all mode keys blink twice.  
2. Press 9 7 7. All mode keys blink three times. Then, after a few seconds the CBL key  
blinks twice.  
Resetting Power, Volume, and Channel Control (Program Code 9 8 0)  
Follow this procedure to return power, volume, and channel control to their original  
settings. This reset procedure does not reset any device codes you programmed or affect  
mode key reassignments.  
1. Press and hold SELECT and CBL until all mode keys blink twice.  
2. Press 9 8 0. All mode keys blink three times.  
Resetting All Changes (Program Code 9 8 1)  
Follow this procedure to return the remote completely back to its original settings.  
1. Press and hold SELECT and CBL until all mode keys blink twice.  
2. Press 9 8 1. All mode keys blink three times. Then, after a few seconds the CBL key  
blinks twice.  
15  
Code Tables  
If the remote does not recognize your device, you can find codes for your device by  
brand. With combination devices (such as a TV with a built-in DVD player), you have  
separate codes for each device component. Therefore, for ease of use, the combination  
device codes are listed first. All other code tables are organized by devices assigned to  
each mode (CBL, TV, DVD,AUX).  
Combination Devices  
If you have a combination device, you may need to reassign the AUX key to operate one  
of the devices. See Reassign Mode Keys for more information. The following tables  
provide some examples of combination devices. If your combination device is not listed,  
simply look for the codes for each separate device.  
DVD/VCR Combo Codes  
Brand  
DVD Code  
AUX (VCR) Code Model  
Go Video  
Go Video  
JVC  
RCA  
Samsung  
Sanyo  
2141  
2147  
2142  
2143  
2144  
2145  
2146  
2038  
2044  
2039  
2040  
2041  
2042  
2043  
DVR5000  
DVR4200  
HRXVC1U  
VC125HF  
DVD-V2000  
DVW5000  
XBV243  
Zenith  
TV/DVD Combo Codes  
Brand  
TV Code  
DVD Code  
Model  
Broksonic  
RCA  
Sansui  
1181  
1182  
1185  
1183  
2148  
2149  
2196  
2150  
SC975  
BD20TF10  
Toshiba  
MD20FL3  
Tuner/CD Combo Codes  
Bose  
3034  
CBL Group: Cable, HDTV Tuner, and Satellite Devices  
HDTV Tuner Codes  
Cable Codes  
Panasonic  
Philips  
RCA  
0021  
0022  
0017  
Scientific-Atlanta 0000, 0001, 0002, 0003,  
0004, 0005  
ABC  
GE  
Gemini  
General Instruments 0010  
Hitachi  
Jerrold  
Motorola  
Pioneer  
Proscan  
Signature  
Starcom  
Stargate  
0010  
0010  
0011  
Satellite Codes  
Dish Network  
Dishnet  
Echostar  
GE  
Hughes  
Philips  
Proscan  
RCA  
0016  
0013  
0014  
0012  
0015  
0023  
0012  
0012  
0010  
0010, 0011  
0007  
0009  
0010  
0010  
0011  
0011  
Sony  
Zenith  
0019, 0020  
0024  
16  
TV Group: TVs and HDTVs  
TV Codes  
TV Codes  
Optonica  
Orion  
TV Codes  
Admiral  
Aiko  
1001, 1139, 1159  
1014  
1002  
1034  
1003, 1034  
Hitachi  
1004, 1006, 1010,  
1011, 1012, 1050,  
1051, 1052, 1109,  
1110, 1111, 1112,  
1113, 1114, 1115,  
1116, 1117, 1118,  
1119, 1120, 1121,  
1143, 1154, 1166,  
1169  
1079, 1139  
1031, 1152  
1003, 1045, 1136,  
1162  
1000, 1003, 1004,  
1005, 1006, 1008,  
1010, 1017, 1057,  
1058, 1063, 1065  
1000, 1003, 1004,  
1008, 1010, 1017,  
1057, 1058, 1063,  
1071, 1072, 1073,  
1074  
1004, 1006, 1075,  
1076, 1143, 1147,  
1166  
1004, 1005, 1006,  
1014, 1137  
1087  
1045  
Akai  
Amtron  
Anam  
National  
Panasonic  
Philco  
AOC  
1004, 1005, 1006,  
1007, 1140, 1141,  
1153  
1180, 1184, 1186  
1034  
Philips  
Infinity  
JBL  
JC Penney  
1000  
1000  
Apex  
Audiovox  
Bell &  
Howell  
Broksonic  
Carver  
Celebrity  
Citizen  
1004, 1005, 1006,  
1008, 1011, 1018,  
1044, 1045, 1048,  
1049, 1053, 1061,  
1072, 1086, 1087,  
1104, 1137, 1138,  
1145  
1001, 1042, 1062  
Pioneer  
1181  
1000  
1002  
1004, 1006, 1008,  
1014, 1034, 1062,  
1087, 1137, 1160  
1004, 1006, 1009  
1010, 1011, 1012,  
1034  
Portland  
Jensen  
JVC  
1004, 1006  
Price Club  
Prism  
Proscan  
Proton  
1010, 1011, 1012,  
1045, 1051, 1054,  
1055, 1056, 1128,  
1129, 1146, 1168  
1002, 1004, 1006  
1004, 1006, 1017  
1034, 1057, 1058  
Colortyme  
Contec/Cony  
1053, 1145  
1004, 1006, 1010,  
1077  
1003, 1045, 1059,  
1078, 1162  
1042, 1062  
Kawasho  
Kenwood  
Kloss  
Novabeam  
Craig  
Crosley  
Crown  
1034  
1000  
1034  
Quasar  
Radio Shack  
KTV  
1034, 1059, 1137,  
1142  
1005  
1001  
1004, 1006  
1000, 1006, 1042,  
1053, 1060, 1061,  
1062, 1145  
1000, 1004, 1006,  
1008, 1017, 1057,  
1058, 1063, 1064,  
1065, 1073, 1106,  
1107, 1108  
1001  
1000, 1004, 1006,  
1050, 1066  
1006, 1050  
1001, 1005, 1006,  
1042, 1062  
1004, 1005, 1006,  
1017, 1018, 1043,  
1067, 1068  
1004, 1005, 1006,  
1017, 1018, 1043,  
1067, 1068, 1069,  
1102  
Radio Shack/  
Realistic  
1004, 1006, 1010,  
1034, 1042, 1053,  
1062, 1079, 1137,  
1138  
1003, 1004, 1005,  
1006, 1007, 1017,  
1053, 1080, 1081,  
1082, 1083, 1084,  
1085, 1105, 1143,  
1145, 1148, 1149,  
1151, 1155, 1163,  
1167, 1170, 1182  
1042, 1062  
1122  
1004, 1006, 1137,  
1138  
1004, 1005, 1006,  
1010, 1013, 1017,  
1086, 1087, 1088,  
1137, 1138, 1156  
Curtis Mathes  
1000, 1004, 1006,  
1013, 1042, 1053,  
1062, 1087, 1137,  
1160, 1167  
1004, 1005, 1006,  
1014, 1015, 1016,  
1103, 1137, 1151  
1004, 1006, 1137  
1053  
1004, 1122  
1002  
LG  
Logik  
Luxman  
LXI  
RCA  
Daewoo  
Daytron  
Dimensia  
Dumont  
Electroband  
Electrohome  
Magnavox  
Realistic  
Runco  
Sampo  
1002, 1003, 1004,  
1006, 1017, 1018  
Majestic  
Marantz  
Emerson  
1004, 1006, 1010,  
1019, 1020, 1021,  
1022, 1023, 1024,  
1025, 1026, 1027,  
1028, 1029, 1030,  
1031, 1032, 1033,  
1034, 1035, 1036,  
1037, 1038, 1039,  
1040, 1042, 1062,  
1101, 1137, 1142,  
1143, 1152, 1168  
1004, 1006  
1041, 1042, 1043,  
1062, 1144  
1040  
1034, 1040  
Samsung  
Megatron  
Memorex  
Sansui  
Sanyo  
1152, 1185  
MGA  
1004, 1041, 1042,  
1062, 1068, 1089,  
1090, 1135, 1144  
1004, 1006, 1010,  
1020, 1031, 1034,  
1040  
1000, 1004, 1006,  
1011, 1012, 1017,  
1040, 1041, 1042,  
1043, 1053, 1055,  
1060, 1061, 1062,  
1091, 1092, 1144,  
1145, 1150  
1004, 1006, 1010,  
1022, 1025, 1079,  
1093, 1094, 1095,  
1100, 1137, 1139  
Mitsubishi  
Scott  
Sears  
Envision  
Fisher  
Montgomery  
Ward  
Motorola  
MTC  
1001  
Fujitsu  
Funai  
Gateway  
GE  
1003, 1139  
1004, 1005, 1006,  
1087  
1034  
1070  
1006, 1060, 1061,  
1147, 1166  
1003, 1004, 1005,  
1006, 1009  
1006, 1014  
1034  
1237  
1003, 1004, 1006,  
1018, 1044, 1045,  
1046, 1053, 1072,  
1132, 1133, 1134,  
1145, 1161  
1004, 1005, 1006,  
1010, 1017, 1047,  
1048, 1049, 1126,  
1127, 1137, 1138  
Multitech  
Multivision  
NAD  
Sharp  
Goldstar  
Hallmark  
NEC  
Signature  
Sony  
1001  
1002, 1157, 1164,  
1165  
Nikko  
Onwa  
Optimus  
1004, 1006  
1147, 1166  
17  
DVD Group: DVR, VCR, CD,  
and DVD Devices  
TV Codes  
VCR Codes  
JVC  
2005, 2006, 2007,  
2013, 2031, 2033,  
2039  
2005, 2006, 2007,  
2012, 2013, 2031,  
2033  
2024  
2010, 2014  
2010  
2024  
2010  
2000, 2014, 2015,  
2028  
2000, 2005, 2006,  
2007, 2012, 2013,  
2014  
Soundesign  
1004, 1006, 1008,  
1034, 1040  
1034  
1000, 1004, 1006,  
1008, 1017, 1057,  
1058, 1063, 1064,  
1065, 1073, 1096,  
1131  
1029, 1034, 1150  
1139  
1003  
1045  
1004, 1006, 1045  
1000, 1001, 1004,  
1005, 1006, 1008,  
1010, 1011, 1012,  
1014, 1034, 1040,  
1064, 1087, 1136,  
1137, 1162  
DVR Codes  
Starlite  
Sylvania  
Kenwood  
Dish Network  
Echostar  
2186  
2037  
KLH  
Kodak  
LG  
Logik  
LXI  
Magnavox  
Philips  
ReplayTV  
Sony  
2036, 2185, 2187  
2188, 2192, 2178  
2189  
Symphonic  
Tandy  
Tatung  
Technics  
Techwood  
Teknika  
TiVo  
2177  
Toshiba  
Zenith  
2190  
2191  
Marantz  
VCR Codes  
Admiral  
Aiko  
2035, 2047  
2018  
Matsushita  
Memorex  
2014  
2007, 2009, 2010,  
2014, 2016, 2017,  
2028, 2035, 2047  
Aiwa  
Akai  
2017  
2002, 2003, 2004,  
2031, 2032  
Telecaption  
Toshiba  
1097  
1042, 1060, 1061,  
1062, 1087, 1091,  
1097, 1098, 1130,  
1131, 1183  
1137  
1044, 1072  
1000  
1000, 1001, 1004,  
1005, 1006, 1017,  
1020, 1029, 1040,  
1044, 1053, 1057,  
1058, 1063, 1064,  
1072, 1073, 1079,  
1099  
1004, 1005, 1006,  
1017  
1001, 1004, 1122,  
1123, 1124, 1125,  
1158  
MGA  
Minolta  
Mitsubishi  
2019, 2026, 2032  
2022, 2023, 2029  
2019, 2022, 2023,  
2026, 2032, 2033  
Audiovox  
Bell &  
Howell  
2010  
2007  
Totevision  
Universal  
Vidikron  
Wards  
Broksonic  
Calix  
2008, 2179  
2010  
Montgomery  
Ward  
Motorola  
MTC  
2035, 2047  
Canon  
Capehart  
Carver  
CCE  
2014, 2015  
2030  
2000  
2014, 2035, 2047  
2009  
2009, 2012, 2017,  
2024  
2005, 2006, 2007,  
2012, 2013, 2031,  
2033  
2010  
2009  
2014  
2010, 2035, 2047  
2027  
Multitech  
2018, 2024  
Citizen  
2009, 2010, 2011,  
2012, 2013, 2018,  
2045  
NEC  
Yamaha  
Zenith  
Colortyme  
Craig  
2005  
2009, 2010, 2016,  
2024  
Nikko  
Noblex  
Olympus  
Optimus  
Optonica  
Panasonic  
Pentax  
Curtis Mathes  
Daewoo  
2005, 2009, 2012,  
2013, 2014, 2015,  
2025, 2046  
2011, 2017, 2018,  
2030, 2045  
2014, 2015, 2180  
2012, 2022, 2023,  
2029  
HDTV Codes  
Daewoo  
Hitachi  
JVC  
1223  
1193, 1236  
1175, 1194  
1195, 1206, 1207,  
1208, 1209  
1179, 1192, 1203,  
1211, 1221  
1201, 1212  
1216, 1218, 1234  
1198, 1202, 1215  
1220  
1178, 1232  
1197  
1174, 1176, 1177,  
1226, 1227, 1229,  
1231  
Daytron  
2030  
Pentex  
Research  
Philco  
Philips  
2013  
Dimensia  
Electrohome  
Emerson  
2025, 2046  
2010, 2019  
2002, 2008, 2010,  
2011, 2014, 2017,  
2019, 2026, 2032  
Mitsubishi  
2014, 2015  
2000, 2014, 2027,  
2176  
2006, 2022, 2033  
2012, 2030, 2045  
2001, 2025, 2046  
2014, 2015  
Panasonic  
Pioneer  
Fisher  
2007, 2016, 2020,  
2021  
Philips  
Pioneer  
RCA  
Sampo  
Samsung  
Sharp  
Portland  
Proscan  
Quasar  
Radio Shack  
Radio Shack/  
Realistic  
Fuji  
2003, 2014  
2017  
2017  
2001, 2009, 2014,  
2015, 2025, 2046  
Funai  
Garrard  
GE  
2010, 2027, 2047  
2007, 2009, 2010,  
2014, 2015, 2016,  
2017, 2019, 2020,  
2021, 2027, 2035  
Sony  
Go Video  
Goldstar  
Gradiente  
2038, 2044, 2184  
2005, 2010, 2013  
2017  
Radix  
RCA  
2010  
2001, 2002, 2009,  
2014, 2022, 2023,  
2025, 2029, 2040,  
2046, 2183  
2007, 2009, 2010,  
2011, 2014, 2015,  
2016, 2017, 2019,  
2020, 2021, 2027,  
2035, 2047  
Thomson  
Toshiba  
Zenith  
1171  
1172, 1173  
1225, 1233, 1235  
Harman  
Kardon  
2000, 2005  
Harwood  
Hitachi  
2024  
2022, 2023, 2029,  
2031  
Realistic  
Ricoh  
JC Penney  
2005, 2006, 2007,  
2008, 2009, 2010,  
2014, 2015, 2022,  
2023, 2024, 2029  
2034  
Jensen  
2022, 2023, 2031  
18  
DVD Codes  
Sharp  
Sherwood  
Sony  
VCR Codes  
Runco  
Samsung  
CD Codes  
Sears  
Sherwood  
Sony  
2122, 2123, 2198  
2124  
2054, 2063, 2064,  
2125, 2126, 2127,  
2128, 2129  
2083, 2201  
2130  
2131  
2168  
2173  
2163  
2174  
2164  
2171  
2165  
2028  
2004, 2009, 2011,  
2041  
2006, 2031, 2033  
2007, 2009, 2016,  
2042  
Sansui  
Sanyo  
Teac  
Technics  
Toshiba  
Yamaha  
Sylvania  
Teac  
Technics  
Techwood  
Toshiba  
Scott  
Sears  
2008, 2011, 2026  
2007, 2010, 2014,  
2016, 2020, 2021,  
2022, 2023, 2029  
2019, 2027, 2035,  
2045, 2047  
2003, 2023, 2024  
2035, 2047  
2014, 2024, 2034  
2003, 2181  
2014, 2029  
2000, 2014, 2015,  
2017, 2026, 2182  
2017  
2007  
2010  
2031  
2017, 2031  
2014  
2010, 2014, 2017  
2011, 2020, 2022,  
2026, 2032  
2009, 2010  
2009  
2005, 2006, 2011,  
2012  
2005, 2006, 2011,  
2012, 2032  
2132  
DVD Codes  
2055, 2065, 2133,  
2134, 2135, 2150,  
2207  
2136, 2137, 2138  
2066, 2139, 2146  
Sharp  
Aiwa  
Alpine  
Apex  
2057, 2070  
2071  
2068, 2069, 2072,  
2073, 2199, 2205  
Shintom  
Signature  
Singer  
Sony  
STS  
Sylvania  
Yamaha  
Zenith  
Audiovox  
2204  
BOSE  
2140  
2074, 2148  
2075  
2076  
2077  
2078, 2079, 2080,  
2081  
2082, 2083  
2084  
Broksonic  
Clarion  
Classic  
Daewoo  
Denon  
AUX Group: Receivers,  
Tuners, Home Theater in a  
Box (HTIB)  
Symphonic  
Tandy  
Tashiko  
Tatung  
Receiver/Tuner Codes  
Emerson  
Fisher  
Funai  
GE  
Go Video  
GPX  
Teac  
Aiwa  
3000, 3001, 3002,  
3003, 3004, 3014,  
3020  
3033, 3034  
3000  
Technics  
Teknika  
Toshiba  
2083  
2048, 2085*, 2086  
2141, 2147  
2087  
2056, 2088, 2089,  
2090, 2091  
2050, 2058, 2092,  
2142  
2093  
2059, 2060  
2206  
2197  
2051, 2094, 2195  
2095  
2096  
Bose  
Carver  
Harman  
Kardon  
JBL  
JVC  
Kenwood  
Linn  
Maganvox  
Marantz  
Onkyo  
Panasonic  
Philips  
Pioneer  
RCA  
Totevision  
Unitech  
Vector  
Research  
Video  
Concepts  
Wards  
3000, 3013  
Hitachi  
3013  
3005  
3006  
3000  
3000  
3000  
3015  
3016, 3017  
3000  
3012*  
3007, 3022,  
3023, 3032  
3000  
3019  
3008, 3009, 3018  
3016, 3017  
3000, 3012*  
3010, 3011, 3012*  
JVC  
Kenwood  
Konka  
Koss  
Lasonic  
Magnavox  
Memorex  
Mintek  
Mitsubishi  
NAD  
Nakamichi  
Norcent  
Onkyo  
Oritron  
Panasonic  
2000, 2009, 2010,  
2011, 2014, 2016,  
2017, 2019, 2022,  
2023, 2024, 2027,  
2029, 2035, 2047  
2014, 2017, 2024  
2005, 2006, 2007,  
2013, 2031  
XR-1000  
Yamaha  
2052  
2082  
2097  
2098, 2099  
2100  
Zenith  
2003, 2028, 2034,  
2043  
Sansui  
Sherwood  
Sony  
Technics  
Wards  
CD Codes  
2114  
ADC  
Aiwa  
Akai  
Emerson  
Fisher  
GE  
Hitachi  
JVC  
Kenwood  
Marantz  
Mitsubishi  
Nakamichi  
NEC  
Onkyo  
Panasonic  
Pioneer  
RCA  
2166  
2151  
2167  
2152  
2153  
2169  
2154  
2155  
2156  
2158  
2170  
2172  
2157  
2159  
2160  
2161  
2162  
2175  
2061, 2101, 2102,  
2103, 2104, 2105,  
2106, 2080, 2200  
2051, 2067, 2107  
2053, 2108, 2109,  
2110, 2111  
2048, 2112  
2113, 2114  
2048, 2049*, 2115,  
2143, 2149, 2202,  
2203  
2116  
2117, 2118, 2119,  
2144  
Yamaha  
Philips  
Pioneer  
*Use  
or  
when testing this code.  
Proscan  
Qwestar  
RCA  
Home Theater in a Box Codes  
Bose  
JBL  
JVC  
Koss  
Onkyo  
Panasonic  
Philips  
Pioneer  
RCA  
3033  
3027  
3028  
3026  
3029  
3030  
3025  
3031  
3024  
3021  
Sampo  
Samsung  
Sansui  
Sanyo  
2120, 2196  
2062, 2121, 2145  
*Use  
when testing this code.  
Sony  
Sanyo  
19  
FCC Compliance  
United States FCC Compliance  
Note: This device has been tested and found to comply with the limits for a Class B digital device,  
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against  
such interference in a residential installation. This equipment generates, uses, and can radiate radio  
frequency energy. If not installed and used in accordance with the instructions, it may cause harmful  
interference to radio communications. However, there is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause harmful interference to radio or television reception,  
which can be determined by turning the equipment OFF and ON, the user is encouraged to try to correct  
the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is  
connected.  
Consult the cable company or an experienced radio/television technician for help.  
Any changes or modifications not expressly approved by Scientific-Atlanta could void the user’s  
authority to operate the equipment.  
The information shown in the FCC Declaration of Conformity paragraph below is a requirement of the  
FCC and is intended to supply you with information regarding the FCC approval of this device. The phone  
numbers listed are for FCC-related questions only and not intended for questions regarding the connection  
or operation for this device. Please contact your cable service provider for any questions you may have  
regarding the operation or installation of this device.  
FCC Declaration of Conformity  
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: 1) the  
device may not cause harmful interference, and 2) the device must accept any interference received, including  
interference that may cause undesired operation.  
AT8450 AllTouch Remote Control  
Scientific-Atlanta, Inc.  
5030 Sugarloaf Parkway  
Lawrenceville, Georgia 30044 USA  
Telephone: 770-236-1077  
Canada EMI Regulation  
This Class B digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de la class B est conforme à la norme NMB-003 du Canada.  
© 2004 Scientific-Atlanta, Inc. All rights reserved.  
AllTouch, Explorer, Scientific-Atlanta, and the Scientific-Atlanta logo are registered trademarks of Scientific-Atlanta, Inc.  
8000 andAT8450 are trademarks of Scientific-Atlanta, Inc.All othertrademarks shown are trademarks oftheirrespective  
owners.  
Product and service availability subject to change without notice.  
Scientific-Atlanta, Inc.  
5030 Sugarloaf Parkway  
P.O. Box465447  
Lawrenceville, GA 30042  
June2004  
4001707 Rev A  
20  

Verilux VA04 User Manual
Teac DV 28E V User Manual
Sunbeam 3226 User Manual
Sony Ericsson K700 User Manual
Seagate ST3300831ACE User Manual
Seagate ST3250820AS User Manual
Rosewill RC218 User Manual
Roberts Radio CR9932 User Manual
Proctor Silex 49414 User Manual
Numark Industries CDN 22MK III User Manual