Panasonic Network Card MAS3132DG User Manual

This product complies with the RoHS Directive (EU 2002/95/EC).  
Switching Diodes  
MAS3132DG  
Silicon epitaxial planar type  
For switching circuits  
Package  
Features  
Code  
Two elements are contained in one package, allowing high-  
SSSMini3-F2  
density mounting  
Pin Name  
Short reverse recovery time trr  
Small terminal capacitance Ct  
1: Cathode 1  
2: Cathode 2  
3: Anode 1, 2  
Absolute Maximum Ratings Ta = 25°C  
Parameter  
Reverse voltage  
Maximum peak reverse voltage  
Symbol  
VR  
Rating  
80  
Unit  
V
Marking Symbol: MO  
VRM  
IF  
80  
V
Internal Connection  
Forward current  
Single  
100  
mA  
3
Double  
150  
Peak forward current Single  
Double  
IFM  
225  
mA  
mA  
340  
Non-repetitive peak  
Single  
IFSM  
500  
1
2
forward surge current * Double  
Junction temperature  
750  
Tj  
150  
°C  
Storage temperature  
Tstg  
55 to +150  
°C  
Note) : t = 1 s  
*
Electrical Characteristics Ta = 25°C 3°C  
Parameter  
Forward voltage  
Symbol  
Conditions  
IF = 100 mA  
Min  
Typ  
Max  
Unit  
V
VF  
VR  
IR  
1.2  
Reverse voltage  
IR = 100 µA  
80  
V
Reverse current  
VR = 75 V  
100  
15  
nA  
pF  
ns  
Terminal capacitance  
Reverse recovery time *  
Ct  
trr  
VR = 0 V, f = 1 MHz  
IF = 10 mA, VR = 6 V  
10  
Irr = 0.1 IR , RL = 100 Ω  
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7031 measuring method for diodes.  
2. Absolute frequency of input and output is 100 MHz.  
3. : trr measurement circuit  
*
Bias Application Unit N-50BU  
Input Pulse  
tp  
Output Pulse  
trr  
tr  
t
10%  
IF  
t
A
90%  
VR  
Irr = 0.1 IR  
tp = 2 µs  
tr = 0.35 ns  
δ = 0.05  
IF = 10 mA  
VR = 6 V  
RL = 100 Ω  
Pulse Generator  
(PG-10N)  
Wave Form Analyzer  
(SAS-8130)  
Rs = 50 Ω  
Ri = 50 Ω  
Publication date: October 2007  
SKF00089AED  
1
 
This product complies with the RoHS Directive (EU 2002/95/EC).  
MAS3132DG  
SSSMini3-F2  
Unit: mm  
1.20 0.05  
0.30 +00..0025  
3
2
1
0.13 +00..0025  
0.20 +00..0025  
(0.4)  
(0.4)  
0.80 0.05  
SKF00089AED  
 
3
Request for your special attention and precautions in using the technical information and  
semiconductors described in this book  
(1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and  
regulations of the exporting country, especially, those with regard to security export control, must be observed.  
(2) The technical information described in this book is intended only to show the main characteristics and application circuit examples  
of the products, and no license is granted under any intellectual property right or other right owned by our company or any other  
company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other  
company which may arise as a result of the use of technical information described in this book.  
(3) The products described in this book are intended to be used for standard applications or general electronic equipment (such as office  
equipment, communications equipment, measuring instruments and household appliances).  
Consult our sales staff in advance for information on the following applications:  
Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support  
systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-  
ucts may directly jeopardize life or harm the human body.  
Any applications other than the standard applications intended.  
(4) The products and product specifications described in this book are subject to change without notice for modification and/or im-  
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product  
Standards in advance to make sure that the latest specifications satisfy your requirements.  
(5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions  
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute  
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any  
defect which may arise later in your equipment.  
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure  
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire  
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.  
(6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,  
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which  
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.  
(7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita  
Electric Industrial Co., Ltd.  
 

Multiquip Marine Lighting GB4000 User Manual
Multi Tech Systems Laptop MTSGSM User Manual
NAD Stereo Amplifier C245BEE User Manual
Newcon Optik Hunting Equipment LRF MOD 4EC User Manual
Niles Audio Speaker System IW2550LCR User Manual
Onkyo Stereo Receiver HT R390 User Manual
Opel Door Audi A3 Avant User Manual
Optiquest Switch iRIS 220 User Manual
Panasonic CRT Television CT 3268S User Manual
Panasonic Projector ET PCE2000 User Manual