Optimus Cassette Player SCT 540 User Manual

14-678.fm Page 1 Wednesday, June 2, 1999 9:29 AM  
Cat. No. 14-678  
OWNER’S MANUAL  
Please read before using this equipment.  
SCT-540  
Dual Cassette Dubbing Deck  
 
14-678.fm Page 3 Wednesday, June 2, 1999 9:29 AM  
IMPORTANT SAFETY INSTRUCTIONS  
Careful attention is devoted to quality standards in the manufac-  
ture of your cassette deck, and safety is a major factor in its de-  
sign. However, safety is also your responsibility.  
Objects and Liquids — Never push objects of any kind into this  
product through openings, as they may touch dangerous voltage  
points or short out parts that could result in a fire or electric  
shock. Never spill liquid of any kind on the product.  
This section lists important information that will help you properly  
use and enjoy your cassette deck. Read all the included safety  
and operating instructions before using your cassette deck.  
Follow them closely, and retain them for future reference.  
Servicing — Do not attempt to service this product yourself, as  
opening or removing covers may expose you to dangerous volt-  
age or other hazards. Refer all servicing to qualified service per-  
sonnel.  
Heed Warnings — Follow all warnings on the product and in the  
operating instructions.  
Damage Requiring Service — Unplug this product from the  
wall outlet and refer servicing to qualified service personnel un-  
der the following conditions:  
Cleaning — Unplug this product from the wall outlet before  
cleaning. Use only a damp cloth for cleaning. Do not use liquid  
or aerosol cleaners.  
• When the power-supply cord or plug is damaged.  
Attachments — Do not use attachments/accessories not rec-  
ommended by the product manufacturer, as they might create a  
hazard.  
• If liquid has been spilled or objects have fallen into the prod-  
uct.  
• If the product has been exposed to rain or water.  
Water and Moisture — Do not use this product near water (for  
example, near a bathtub, washbowl, kitchen sink, or laundry tub;  
in a wet basement; or near a swimming pool).  
• If the product does not operate normally by following the  
operating instructions. Adjust only those controls that are  
covered by the operating instructions, as an improper adjust-  
ment of other controls may result in damage and will often  
require extensive work by a qualified technician to restore the  
product to normal operation.  
Accessories — Do not place this product on an unstable cart,  
stand, tripod, bracket, or table. The product may fall, causing se-  
rious injury to a child or adult, and serious damage to the prod-  
uct. Use only with a cart, stand, tripod, bracket, or table recom-  
mended by the manufacturer or sold with the product. Follow the  
manufacturer's instructions for mounting, and use a recom-  
mended mounting accessory.  
• If the product has been dropped or damaged in any way.  
• When the product exhibits a distinct change in performance.  
Replacement Parts — When replacement parts are required,  
be sure the service technician uses replacement parts specified  
by the manufacturer or having the same characteristics as the  
original part. Unauthorized substitutions may result in fire, elec-  
tric shock, or other hazards.  
Carts — Move the product on a cart carefully.  
Quick stops, excessive force, and uneven sur-  
faces may cause the product/cart to overturn.  
Safety Check — Upon completion of service or repairs to this  
product, ask the service technician to perform safety checks to  
determine that the product is in proper operating condition.  
Ventilation — Slots and openings in the cabinet provide ventila-  
tion, ensure reliable operation, and protect from overheating. Do  
not block or cover these openings, and do not place the product  
on a bed, sofa, rug, or other similar surface. Do not place the  
product in a built-in installation such as a bookcase or rack un-  
less it provides proper ventilation as specified by the manufac-  
turer.  
Wall or Ceiling Mount — The product should be mounted to a  
wall or ceiling only as recommended by the manufacturer.  
Heat — The product should be situated away from heat sources  
such as radiators, heat registers, stoves, or other products (in-  
cluding amplifiers) that produce heat.  
Power Sources — Operate this product using only the power  
source indicated on its marking label. If you are not sure of your  
home's power type, consult your product dealer or local power  
company.  
Non-use Periods — Unplug the cassette desk’s power cord  
when you will not use it for extended periods.  
Polarization — This product is equipped with a polarized AC  
line plug (a plug having one blade wider than the other). This  
plug will fit in the power outlet only one way. This is a safety fea-  
ture. If you cannot insert the plug fully into the outlet, try revers-  
ing the plug. If the plug still doesn't fit, contact your electrician to  
replace your obsolete outlet. Do not defeat the safety purpose of  
the polarized plug. If you need an extension, use a polarized  
cord.  
Power-Cord Protection — Route power-supply cords so they  
are not likely to be walked on or pinched by items placed on or  
against them, paying particular attention to cords at plugs, con-  
venience receptacles, and the point where they exit from the  
product.  
Lightning — For added protection for this product during a light-  
ning storm, or when it is left unattended and unused for long pe-  
riods of time, unplug it from the wall outlet and disconnect the an-  
tenna or cable system. This will prevent damage to the product  
due to lightning and power-line surges.  
Overloading — Do not overload wall outlets, extension cords,  
or integral convenience receptacles, as this can result in a risk  
of fire or electric shock.  
3
 
14-678.fm Page 4 Wednesday, June 2, 1999 9:29 AM  
CONTENTS  
Preparation ................................................................................................................................................................... 5  
Connections ............................................................................................................................................................ 5  
Line Output Jacks ............................................................................................................................................. 5  
Line Input Jacks ................................................................................................................................................ 5  
AC Power Cord ................................................................................................................................................. 5  
Controls and Functions .............................................................................................................................................. 6  
Operation ...................................................................................................................................................................... 7  
Automatic Search Music System ............................................................................................................................ 7  
Using Continuous Play (DECK 1 to DECK 2) ......................................................................................................... 7  
Recording a Cassette Tape ..................................................................................................................................... 7  
Dubbing a Cassette Tape ........................................................................................................................................ 8  
Changing a Cassette Tape in DECK 1 During Dubbing ................................................................................... 8  
Auto Dubbing a Cassette Tape ............................................................................................................................... 8  
Hi-Speed Dubbing a Cassette Tape ........................................................................................................................ 8  
Care ........................................................................................................................................................................ 9  
Tape Tips ................................................................................................................................................................. 9  
Tape Selection .................................................................................................................................................. 9  
Restoring Tape Tension and Sound Quality ..................................................................................................... 9  
Erasing Tapes ................................................................................................................................................... 9  
Preventing Accidental Erasure ......................................................................................................................... 9  
Environment ................................................................................................................................................... 10  
Cleaning the Tape-Handling Parts .................................................................................................................. 10  
Troubleshooting .................................................................................................................................................... 10  
Specifications ............................................................................................................................................................. 11  
4
 
14-678.fm Page 5 Wednesday, June 2, 1999 9:29 AM  
PREPARATION  
READ THIS BEFORE OPERATING  
CONNECTIONS  
• Choose the installation location of your cassette deck  
carefully. Avoid placing it in direct sunlight or close to  
a source of heat. Also avoid locations subject to  
vibrations and excessive dust, heat, cold or moisture.  
Connect your cassette deck to your receiver or amplifier  
using the supplied audio cables.  
Line Output Jacks  
• Do not open the cabinet as this might result in dam-  
age to the circuitry or electrical shock. If a foreign  
object should get into the set, contact your dealer.  
Using one of the audio cables, connect the cassette  
deck’s L and R LINE OUT jacks to the receiver or amplifi-  
er’s left and right tape input jacks.  
• When removing the power plug from the wall outlet,  
always pull directly on the plug, never yank the cord.  
Line Input Jacks  
• Do not attempt to clean the unit with chemical sol-  
vents as this might damage the finish. Use a clean,  
dry cloth.  
Using the other audio cable, connect the cassette deck’s  
LINE IN jacks to the receiver or amplifier’s tape output  
jack.  
• Keep this manual in a safe place for future reference.  
Note: If you are not sure which receiver/amplifier jacks to  
use, refer to your receiver or amplifier’s owner’s manual.  
Amplifier  
LINE  
IN  
OUT  
Cassette Deck  
L
R
To AC Outlet  
AC Power Cord  
Plug the AC power cord into an AC wall socket.  
5
 
14-678.fm Page 6 Wednesday, June 2, 1999 9:29 AM  
CONTROLS AND FUNCTIONS  
5
3
9
7
11  
L
-00 -10 -5  
0
+3 +6  
R
14  
12  
15  
2
6
10  
13  
1
4
8
1. POWER  
2. PITCH CONTROL Volume  
3. DECK 1 Cassette Lid and Holder  
4. DUBBING with Indicator  
HI-SPEED DUBBING with Indicator  
AUTO DUB with Indicator  
6. REVERSE MODE Indicator  
8. REVERSE MODE Selector  
10. DOLBY NR  
5. DECK 2 Cassette Lid and Holder  
7. LEVEL METER  
9. DECK 2 COUNTER  
11. RESET — Resets DECK 2 COUNTER  
12. DOLBY NR Indicator  
14. REC LEVEL Control Volume  
13. Operation Panel Deck 1  
PLAY  
STOP  
— ASMS —  
15. Operation Panel Deck 2  
PLAY  
STOP  
— ASMS —  
RECORD  
REC/  
PAUSE  
6
 
14-678.fm Page 7 Wednesday, June 2, 1999 9:29 AM  
OPERATION  
1. To turn on the cassette deck, press POWER.  
USING CONTINUOUS PLAY (DECK 1  
TO DECK 2)  
2. Gently press OPEN  
on the cassette door (DECK 1  
or DECK 2) and load the cassette tape.  
You can set the cassette deck to play one side of the  
tape in DECK 1, then automatically play the tape in DECK  
2.  
3. Press DOLBY NR and the indicator lights. Press  
DOLBY NR again to turn off this feature.  
4. Press REVERSE MODE to select the desired reverse  
mode (Only DECK 2).  
To turn on the continuous play, press PLAY on DECK 1 for  
3 or 4 seconds. DECK 1 starts playing and the PLAY indi-  
cator on DECK 2 flashes.  
The cassette deck plays or records one  
side of the tape and stops.  
The cassette deck plays or records both  
side of the tape and stops.  
When the cassette in DECK 1 finishes playing, the cas-  
sette tape in DECK 2 automatically begins playback.  
Note: To play or record both sides, you must press  
To cancel the continuous play, press STOP or any cas-  
sette button of the deck which is currently playing (either  
DECK 1 or 2).  
PLAY  
(not PLAY  
).  
The cassette deck plays endlessly.  
Note: During recording, the cassette deck automati-  
cally changes the setting and operates the same way  
as both-side play.  
RECORDING A CASSETTE TAPE  
5. Press the PLAY button.  
You can only record to a cassette in DECK 2.  
The indicator lights and play begins.  
For forward play.  
Select the source to record from on your receiver amplifi-  
er (CD, VCR, TUNER or DVD).  
For reverse play.  
1. Gently press OPEN  
on DECK 2 and insert the tape  
6. Adjust the tape speed by turning the pitch control.  
7. Press STOP to stop the tape.  
to be recorded into the cassette holder.  
2. Press DOLBY NR to use the noise-reduction system.  
3. Select the desired reverse mode.  
To record on one side only.  
To record on both sides.  
AUTOMATIC SEARCH MUSIC  
SYSTEM  
RECORD  
PAUSE  
REC/  
4. Press  
.
The automatic search music system (ASMS) lets you  
quickly locate a desired selection on a cassette tape. It  
searches for the blank space before a selection and auto-  
matically stops just before playback begins.  
The RECORD indicator lights and both the PLAY  
direction indicators flash.  
5. Turn REC LEVEL between MIN and MAX to adjust the  
recording level.  
1. Press PLAY to begin playing a tape.  
6. To select the direction for recording, press either  
2. To skip to the beginning of the current selection,  
PLAY  
or  
.
press  
site direction of the play direction. To skip to the  
beginning of the next selection, press or  
or  
— whichever points in the oppo-  
— whichever points in the same direction as the play  
direction.  
ASMS might not operate as expected if:  
• The pause between selection is less than 4 seconds  
long.  
• The overall recorded volume level of a selection is  
very low.  
• The noise level between selections is very high.  
7
 
14-678.fm Page 8 Wednesday, June 2, 1999 9:29 AM  
Notes:  
AUTO DUBBING A CASSETTE TAPE  
• If you want to record both sides of the cassette tape  
It is convenient to use this function when dubbing an en-  
tire cassette tape from the beginning.  
when the reverse mode switch is in  
, be  
sure to press PLAY . Otherwise, if you press PLAY  
, only side B of the cassette tape records.  
1. Insert a prerecorded cassette tape into DECK 1 and a  
blank tape for recording into DECK 2.  
• When both sides of the tape finish recording, DECK 2  
automatically stops.  
2. Press AUTO DUB.  
The cassette tapes of DECK 1 and DECK 2 rewind  
automatically to the beginning after you press AUTO  
DUB. When rewinding is complete, Auto Dubbing  
begins.  
DUBBING A CASSETTE TAPE  
1. Insert a prerecorded cassette tape into DECK 1, and  
a blank tape for recording into DECK 2 to dub a tape  
on one side.  
One side of a cassette tape is recorded from the  
beginning to the end automatically regardless of the  
mode.  
2. Press DUBBING.  
The RECORD and DUBBING indicators light, and  
both PLAY direction indicators  
flash.  
/
of DECK 2  
HI-SPEED DUBBING A CASSETTE  
TAPE  
3. Press PLAY  
or  
to select the direction of the  
cassette tape for DECK 2.  
1. Insert a prerecorded cassette tape into DECK 1 and a  
blank tape for recording into DECK 2.  
The indicators in the selected buttons stop blinking  
and the other indicators turn off.  
2. Press HI-SPEED.  
The indicator  
of DECK 1 lights up.  
3. Press DUBBING.  
4. Press the STOP button on DECK 2 to stop dubbing.  
4. Press PLAY  
or  
to select the direction of the  
cassette tape for DECK 2.  
Both decks stop.  
The indicators in the selected buttons stop blinking  
and the other indicators turn off.  
Note: If the original tape was recorded using Dolby NR,  
the copy also has Dolby NR, regardless of the position of  
the DOLBY NR switch. If the tape you copy does not have  
Dolby NR, you cannot add it to the tape you record.  
5. Press STOP on DECK 2 to stop dubbing.  
Both decks stop.  
Changing a Cassette Tape in DECK 1 During  
Dubbing  
If you press STOP on DECK 1 during dubbing, DECK 1  
stops and DECK 2 records 4 seconds of blank tape then  
goes into the pause mode. During this time, you can  
change the cassette tape in DECK 1. Press  
RECORD  
PAUSE  
REC/  
then press the PLAY button of DECK 1 to  
resume dubbing.  
8
 
14-678.fm Page 9 Wednesday, June 2, 1999 9:29 AM  
To prevent the tape from being twisted:  
CARE  
• Don’t pull the tape out of the upper opening of the  
cassette tape.  
To enjoy your Optimus SCT-540 Dual Cassette Dubbing  
Deck for a long time:  
• If the tape is wound loosely inside the cassette, use  
the tape deck on fast forward or reverse to tighten  
the tape.  
• Keep the cassette deck dry. If it gets wet, wipe it dry  
immediately.  
• Use and store the cassette deck only in normal tem-  
perature environments.  
• If a small portion of tape is unwound from the cas-  
sette, tighten the tape using a pencil.  
• Handle the cassette deck gently and carefully. Don’t  
drop it.  
Use a pencil to  
take up the slack  
and rotate it in the  
arrow direction.  
• Keep the cassette deck away from dust and dirt.  
• Wipe the cassette deck with a damp cloth occasion-  
ally to keep it looking new.  
Modifying or tampering with the cassette deck’s internal  
components can cause a malfunction and invalidate its  
warranty. If your cassette deck is not performing as it  
should, take it to your local RadioShack store for assis-  
tance.  
Erasing Tapes  
To record over a cassette tape, simply record as usual.  
The cassette deck records over the previous recording.  
You can quickly erase both sides of a cassette tape using  
a bulk tape eraser available at your local RadioShack  
store.  
TAPE TIPS  
Tape Selection  
Note: If you use metal tape, the recorded sound might  
not be erased properly.  
For the automatic tape select function to work properly,  
metal and chrome (cobalt) tapes must have identification  
holes.  
Preventing Accidental Erasure  
Cassette tapes have two erase-protection tabs — one for  
each side. When a tab is in place, you can record on that  
side.  
Normal Tapes  
To prevent accidental erasure of a tape recording, use a  
screwdriver to remove one or both of the cassette tape’s  
erase-protection tabs. This prevents REC from being  
pressed.  
Chrome (Cobalt) Tapes  
Tape position identification holes.  
If you later decide to record on a tape side after you have  
removed the erase-protection tab, place a piece of strong  
plastic tape over that side’s erase-protection hole. Be  
sure you cover only the hole originally covered by the  
erase-protection tab.  
Restoring Tape Tension and Sound Quality  
After you play a cassette tape several times, the tape  
might become tightly wound on the reels. This can cause  
playback sound quality to deteriorate. To restore the  
sound quality, fast-forward the tape from the beginning to  
the end of one side, then completely rewind it. Then loos-  
en the tape reels by gently tapping each side of the cas-  
sette’s outer shell on a flat surface.  
Caution: Removing the erase-protection tabs does not  
prevent a bulk eraser from erasing a cassette tape.  
Caution: Be careful not to damage the cassette when  
tapping it. Do not touch the exposed tape or allow any  
sharp objects near the cassette.  
9
 
14-678.fm Page 10 Wednesday, June 2, 1999 9:29 AM  
Environment  
TROUBLESHOOTING  
Avoid using the deck in the following conditions:  
If the cassette deck is not working as it should, the follow-  
ing suggestions might help. If you follow the suggestions  
in this chart and the cassette deck still does not work  
properly, contact your local RadioShack store for assis-  
tance.  
• In areas with high temperatures (near a heater,  
exposed to direct sunlight, for example.)  
• In areas with extremely low temperatures.  
• In areas where there is excessive humidity.  
• In a dusty atmosphere.  
Problem  
Probable Cause  
Suggestion  
No sound while Volume of stereo Adjust the vol-  
• In areas where power line voltage fluctuations are  
severe (in which case the use of a voltage regulator  
may be advisable).  
the tape is  
operating.  
receiver/amplifier ume.  
is set to “0.”  
Input function  
switch of ampli-  
fier is not set to  
TAPE.  
Set the input  
function switch to  
TAPE.  
Cleaning the Tape-Handling Parts  
Dirt, dust or particles of the tape's coating can accumu-  
late on the tape heads and other parts that the tape  
touches. This can greatly reduce the performance of the  
cassette player. After every 20 hours of tape player oper-  
ation, follow these steps to clean the tape-handling parts  
or use a cassette deck cleaning kit (available at your lo-  
cal RadioShack store).  
Strange  
tone quality  
or  
Noise reduction  
switch is not in  
the correct posi-  
Set the noise  
reduction switch  
to match the  
appropriate kind  
of recorded tape  
you are using.  
ragged sound. tion.  
REC cannot be Erase-protection Cover the erase-  
1. Remove the batteries and disconnect any other  
power source.  
operated.  
tabs are removed. prevention tab  
slots with adhe-  
sive tape.  
2. Open the cassette compartment door and press  
PLAY to expose the tape-handling parts.  
Low volume or Tape heads are  
Clean the tape  
heads.  
weak sound  
with mute inter-  
vals.  
dirty.  
3. Use a cotton swab dipped in denatured alcohol or  
tape head cleaning solution to clean the tape guides,  
record/play head, erase head, pinch roller, and cap-  
stan.  
Poor operation Mute recorded  
of skip function. length between  
two successive  
Increase the mute  
length so that it is  
longer than 4 sec-  
onds or use a  
4. When you finish cleaning, press STOP/EJECT and  
close the cassette compartment door. Then recon-  
nect power.  
music selections  
is not longer than tape that has a  
4 seconds.  
mute length which  
is longer than 4  
seconds.  
10  
 
14-678.fm Page 11 Wednesday, June 2, 1999 9:29 AM  
SPECIFICATIONS  
DECK 1 (only for playing)  
Track system ........................................................................................................................... 2 Track, 2-channel Stereo  
Tape Speed .............................................................................................................................................. 4.8 cm/second  
Motor ................................................................................................................................................................ DC Motor  
Frequency response:  
Normal Tape  
CrO2 Tape  
40–12.5 kHz  
40–12.5 kHz  
Fast Forward and Rewind Time ............................................................................................... 130 seconds (C-60 tape)  
DECK 2 (for recording/playing)  
Track system ........................................................................................................................... 4 Track, 2-channel Stereo  
Recording system ............................................................................................................................................... AC Bias  
Erasing System .............................................................................................................................................. AC Erasing  
Tape Speed .............................................................................................................................................. 4.8 cm/second  
Motor ................................................................................................................................................................ DC Motor  
Frequency response:  
Normal Tape  
CrO2 Tape  
40–14 kHz  
40–15 kHz  
Fast Forward and Rewind Time ............................................................................................... 130 seconds (C-60 tape)  
Wow and Flutter ................................................................................................................................. 0.2% (JIS, WRMS)  
Signal-to Noise Ratio (Dolby B NR Off) ............................................................................................. 55 dB (CCIRARM)  
Noise Reduction Effect (Dolby B NR On) ............................................................................................ 65 dB (CCIRARM)  
General  
Power Requirements ............................................................................................................................ 120 V AC, 60 Hz  
Power Consumption ................................................................................................................................................. 11 W  
Dimensions (W x H x D) ............................................................................................................... 16.5 × 5.7 × 13 Inches  
(420 × 146 × 330 mm)  
Weight (net) ...................................................................................................................................................... 10 lb. 1 oz  
4.6 kg  
Specifications are typical; individual units might vary. Specifications are subject to change and improvement without  
notice.  
11  
 
14-678.fm Page 12 Wednesday, June 2, 1999 9:29 AM  
Limited One-Year Warranty  
This product is warranted by RadioShack against manufacturing defects in material and workman-  
ship under normal use for one (1) year from the date of purchase from RadioShack company-owned  
stores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, Ra-  
dioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING  
THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED  
IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED  
HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RE-  
SPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY  
LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFOR-  
MANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUD-  
ING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE, LOSS OF  
TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDENTAL,  
OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN ADVISED OF THE POSSI-  
BILITY OF SUCH DAMAGES.  
Some states do not allow the limitations on how long an implied warranty lasts or the exclusion of in-  
cidental or consequential damages, so the above limitations or exclusions may not apply to you.  
In the event of a product defect during the warranty period, take the product and the RadioShack  
sales receipt as proof of purchase date to any RadioShack store. RadioShack will, at its option, un-  
less otherwise provided by law: (a) correct the defect by product repair without charge for parts and  
labor; (b) replace the product with one of the same or similar design; or (c) refund the purchase  
price. All replaced parts and products, and products on which a refund is made, become the prop-  
erty of RadioShack. New or reconditioned parts and products may be used in the performance of  
warranty service. Repaired or replaced parts and products are warranted for the remainder of the  
original warranty period. You will be charged for repair or replacement of the product made after the  
expiration of the warranty period.  
This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse,  
accident, misuse, improper or abnormal usage, failure to follow instructions, improper installation or  
maintenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs  
other than those provided by a RadioShack Authorized Service Facility; (c) consumables such as  
fuses or batteries; (d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs  
of product removal, installation, set-up service adjustment or reinstallation.  
This warranty gives you specific legal rights, and you may also have other rights which vary from  
state to state.  
RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort Worth, TX 76102  
We Service What We Sell  
04/99  
RadioShack  
A Division of Tandy Corporation  
Fort Worth, Texas 76102  
06A99  
Printed in China  
 

Multi Tech Equipment Dust Collector MA30120 User Manual
Musical Fidelity Stereo Amplifier M6PRX User Manual
Nikon Camcorder D2HS User Manual
NordicTrack Treadmill NTTL11991 User Manual
NuTone Ventilation Hood RF 68HRPSC User Manual
Olympus Camera Accessories FS HV1 User Manual
Omega Thermometer DPG110 120 User Manual
Oreck Air Cleaner 21057 03 User Manual
Panasonic Camera Accessories AK HCU200E User Manual
Paradyne Computer Hardware 7610 User Manual