Nokia Cell Phone Nokia User Manual

User’s Guide  
Nokia is a registered trademark of Nokia Corporation, Finland.  
© 1998 Nokia Mobile Phones. All rights reserved.  
Nokia Mobile Phones operates a policy of continuous development.  
Therefore we reserve the right to make changes and improvements to any of  
the products described in this guide without prior notice.  
Issue 4  
9351391  
 
Quick Start  
Here are a few basic instructions about using your new Nokia 550 phone:  
Attach the battery to the phone.  
Connect the charger to the bottom of the phone.  
To switch the phone on/ off, press  
.
To make a call:  
If your phone is within the network service area (if the O symbol appears on the display),  
you can make a call.  
To make a call, key in the desired phone number (including the area code).  
Press  
Press  
to make a call.  
to end a call.  
To receive a call:  
Press  
.
To correct keypresses or to clear the entire display:  
Press  
.
For more details about these and other functions, see the appropriate pages of this guide.  
3
1999 Nokia Mobile Phones. All Rights Reserved.  
 
 
For Your Safety...............................................2  
Quick Start......................................................3  
Change Lock Code (Menu 3 1)....................... 20  
Call Alert (Menu 4 2)........................................ 21  
1-Touch Dialling (Menu 4 3).......................... 21  
Automatic Answer (Menu 4 4)....................... 21  
Send DTMF Tones (Menu 5) .............................. 21  
Alarm Options (Menu 6) .................................... 22  
Countdown Timer (Menu 6 0)........................ 22  
Alarm Clock (Menu 6 1)................................... 22  
Prefix Editor (Menu 7) ........................................ 23  
List Of Keys .............................................................. 5  
Selection Keys ......................................................... 5  
Accessories ............................................................... 8  
2. Basic Functions ..........................................9  
Making A Call .......................................................... 9  
Last Number Redial .............................................10  
Keypad Locked .......................................................10  
3. The Memory..............................................12  
Keying In Names ...................................................12  
Storing Information .............................................12  
Clearing Information ...........................................13  
Recalling Information By Memory Location  
Number And By Name ........................................13  
Scanning For A Number .....................................14  
Scanning For A Name .........................................14  
Number Of The Phone .........................................14  
Scratchpad Memory ............................................14  
4. The Menu Facility ....................................15  
The Menu Method ................................................15  
The Menu Shortcut ..............................................15  
Menu Functions ....................................................17  
Care and Maintenance ................................24  
Important Safety Information ....................24  
Emergency Calls ..........................................25  
Troubleshooting ...........................................25  
4
1999 Nokia Mobile Phones. All Rights Reserved.  
 
1. Basic Information  
Press and hold to switch the phone on or  
off.  
Using This Guide  
The cellular phone described in this guide is  
approved for use in a NMT 450 network. A  
number of features included in this guide are  
called Network Services provided by cellular  
service providers. Before you can take  
Press to switch to alpha mode and key  
in or display letters; press again to switch  
back to numeric mode.  
advantage of any of these Network Services, you  
must subscribe to the service(s) you require  
from your home  
Press to delete characters or to clear the  
entire display.  
Press to call a number. Press for Register  
Recall (NMT system feature) during a  
call.  
service provider. You can then activate these  
functions as described in this guide. The manual  
activation commands for various services are  
not presented in this guide (e.g. using characters  
for activating or deactivating services). The  
phone, nevertheless, is capable of handling  
commands given in that form. For these  
commands, please consult with your cellular  
service providers. The operation of the phone  
requires successive key depressions; two keys  
are never to be pressed simultaneously.  
Press to end a call.  
Press these keys to scroll through the  
memory locations and menu functions.  
First press the Menu or the Memory  
selection key and then use keys  
and  
to scroll through the menu or  
the memory. (Press and hold down to  
scroll continuously through the menu or  
the memory.)  
-
Number and character keys.  
Selection Keys  
Beneath the display, there are two selection  
keys. Their functions depend entirely on the  
guiding texts that appear on the display’s  
bottom line. In standby mode, Menu allows  
access to the menu functions and Memory to  
the memory operations.  
List Of Keys  
(More detailed information on the use of each  
key is given in the appropriate place in the  
manual.)  
5
1999 Nokia Mobile Phones. All Rights Reserved.  
 
       
O
Display Indicators  
Service indicator. Indicates that you are in a  
cellular service area. If it does not appear, you  
are outside the service area and the network  
cannot serve you.  
Roam indicator. Comes on when the NMT  
network cannot transmit calls to your phone.  
Press  
to reregister the phone on the system,  
or try to make a call.  
ABC  
and bar (left side of display)  
Alpha mode indicator. Shows that the phone is  
in alpha mode and letters can be keyed in or  
displayed.  
Signal strength indicator. The bar above the  
symbol indicates the current signal strength at  
the location of your phone. The higher the bar,  
the better the signal in the area.  
Indicates that you have received a voicemail  
message which you can listen to by calling the  
No bar: You are outside the coverage area and  
cannot make any calls.  
voicemail centre number. The  
indicator  
appears on the display until you call the  
voicemail centre number. *  
and bar (right side of display)  
Charge level indicator. Indicates the charge  
level of the battery. The higher the bar,  
the better the battery charge.  
Indicates that an SMS message has been  
received. If the indicator is flashing, there is no  
space for new messages. For more space erase  
old messages by selecting the Erase option  
when you are reading messages. *  
Call Forwarding indicator. When the symbol is  
displayed, your incoming calls are being  
transferred to another number (NMT network  
service).  
* Note: This function is operational only if the  
local network supports it. Check with the  
network service operator.  
Call-indicator. A call is in progress.  
D
Menu function/memory location indicator.  
Indicates which Menu function is active, or  
which memory location is currently being used.  
Also indicates the place that you are currently  
editing when writing a message.  
Multifrequency tone indicator. When on, it  
indicates that numerical information can be  
sent for communication purposes. When  
flashing, it  
indicates that numerical information is being  
sent.  
COUNTRY CODE (e.g. FI , SV)  
Indicates in which country the phone will  
operate. If you wish to change the code, see  
‘Country’.  
6
1999 Nokia Mobile Phones. All Rights Reserved.  
 
 
The battery can be charged and discharged  
hundreds of times, but it will eventually wear  
out. When the operating time (talk-time and  
standby time) is noticeably shorter than normal,  
it is time to buy a new battery.  
Charging A New Battery  
Before you can use your phone, you must fully  
charge the battery. A new battery must be  
charged for at least 16 hours before being used  
for the first time. Attach the battery to the  
phone and connect the charger to the bottom of  
the phone as described on page 2.  
NiMH battery performance will vary with the  
condition of the battery. The following  
conditions will reduce battery performance:  
temperature extremes, poor charging or  
discharging practices and improper storage.  
Battery Information  
When the battery charge is low, the warning  
message BATTERY LOW flashes you at regular  
intervals.  
The NiMH battery’s performance is particularly  
limited in temperatures below -10°C and Li-Ion  
batteries performance is particularly limited in  
temperatures below 0°C. Therefore, the battery  
should be kept protected from the cold, e.g., in a  
pocket, if it is to be exposed to low temperatures  
for long periods.  
Finally, the message RECHARGE BATTERY is  
displayed. If you do not recharge your battery,  
the phone switches off after a while. While  
charging is in progress, the battery charge bar  
on the display scrolls repeatedly from clear to  
full. When the bar stops scrolling and remains at  
a full bar, and a message BATTERY FULL appears  
on the display, charging is completed. If the  
display bar continues to scroll, charging may be  
temporarily disrupted (for instance, if the  
battery is too hot or too cold).  
The approximate charging times, for charging  
empty batteries to an 80% capacity, while using  
the Fast Travel Charger are:  
NiMH batteries:  
550 mAh 60 min.  
Li-Ion batteries:  
Use only batteries approved by the phone  
manufacturer, and recharge your battery only  
with the chargers approved by the  
400 mAh 50 min.  
1500 mAh 180 min.  
manufacturer. When a charger is not in use,  
disconnect it from the power source. Do not  
leave the battery connected to a charger for  
longer than a week, since overcharging may  
shorten its life. If left unused, a fully charged  
battery will discharge itself over time.  
A trickle charge to full 100% capacity would  
require a couple of hours more, but it is not  
necessary in normal use.  
Temperature extremes will affect the ability of  
your battery to charge: it may require cooling or  
warming first.  
Note that a new NiMH battery achieves full  
performance only after two or three complete  
charge and discharge cycles!  
Note:  
- Use the battery only for its intended purpose.  
For good operation times when using a NiMH  
battery, discharge the battery from time to time  
by leaving your phone switched on until it turns  
itself off (or by using the battery discharge  
facility of any approved accessory for your  
phone). Do not attempt to discharge the battery  
by any other means.  
- Never use any charger or battery which is  
damaged or worn out.  
- Do not short-circuit the battery. Accidental  
short-circuiting can occur when a metallic  
object (coin, clip or pen) causes direct  
connection between the + and - terminals of  
7
1999 Nokia Mobile Phones. All Rights Reserved.  
 
   
the battery (metal strips on the back of the  
battery), for example, when you carry a spare  
battery in your pocket or purse. Short-circuiting  
the terminals may damage the battery or the  
connecting object.  
Accessories  
An extensive range is available for your phone.  
You can select these according to your special  
communication needs. For availability of  
accessories, check with your local dealer. When  
you disconnect the power cord of any accessory,  
grasp and pull the plug, not the cord.  
- Leaving the battery in hot or cold places, such as  
in a closed car in summer or winter conditions, will  
reduce the capacity and lifetime of the battery.  
Always try to keep the battery  
between 15°C and 25°C (59°F and 77°F). A phone  
with a hot or cold battery may temporarily not  
work, even when the battery is fully charged.  
IMPORTANT! Use only accessories approved by  
the phone manufacturer. The use of any other  
types will invalidate any approval or warranty  
applying to the phone and may be dangerous.  
- Dispose of used batteries in accordance with  
local regulations. Recycle!  
Call Forwarding  
Call transfer is an NMT system feature. Contact  
your system provider for further information.  
This feature allows you to transfer incoming  
calls to another telephone number.  
- Do not dispose of batteries in a fire!  
Switching On/Off  
As with any other radio transmitting device,  
avoid unnecessary contact with the antenna  
when the phone is switched on.  
Register Recall Function  
The NMT network may offer a service called  
Register Recall (three-way calling or conference  
call). This feature allows you to activate  
a second call while you are already making a  
call.  
Press  
to switch the phone on /off.  
When turning the phone on, it will carry out a  
short self-test, briefly displaying its number, or  
the name associated with the number (operator,  
dealer or your own name).  
This function is activated with the  
key. For  
When the appropriate country code and O  
indicator appear on the display, the phone is  
ready for use.  
further information, contact your local  
system provider as the operating instructions  
vary from country to country.  
A cellular phone can only make and receive calls  
when it is switched on.  
Signal Strength  
The quality of your call depends on the strength  
of the cellular signal in your area. The phone  
displays current field strength as a series of bars  
on the left-hand side of its display screen - the  
more bars, the better the signal in your area.  
If the signal is poor, you can try moving the  
phone slightly to improve reception. If you are  
using the phone in a building, you may find that  
reception is better near a window.  
8
1999 Nokia Mobile Phones. All Rights Reserved.  
 
         
2. Basic Functions  
For example, when calling abroad from Finland,  
instead of dialling  
Making A Call  
Key in the number (include the area code,  
even if you are making a local call).  
990 010 81 123 456  
+ 010 81 123 456 can be used.  
If you make a mistake you can delete the last  
number by pressing  
display, by pressing and holding  
second.  
Press the  
key twice to insert  
or clear the whole  
a + character.  
for half a  
If you also store all of your domestic phone  
numbers with the prefix +, you need not insert  
the phone number with the international access  
codes when you wish to call these numbers from  
abroad.  
Press  
The  
.
indicator and the dialled number will  
appear on the display. When the number clears  
from the display and a tone is heard, the phone  
has transmitted the number.  
If the network does not support this function,  
a message PREFIX + CANNOT BE USED may  
appear on the display. Then, the international  
access code must be keyed in.  
Lift the phone to your ear, and wait until  
your call is answered, then speak.  
When you have finished the call, press  
.
Receiving A Call  
When there is an incoming call, you will hear  
the ringing tone and the text CALL appears on  
the display. If the ringing tone has been  
If the message LOCKED appears on the display,  
your phone has been locked. (see ‘Security  
Options’). When the phone is locked, calls may  
be possible to the emergency number  
preprogrammed into your phone (e.g., 112 or  
some other official emergency number).  
switched off - the SILENT SERVICE feature has  
been selected for privacy or other reasons - the  
lights will flash instead and only a short beep  
will be heard (see ‘Call Alert’). An easy way to  
select the SILENT SERVICE feature ON is  
Also, calls to the numbers in memory locations  
94, 95, 96, and 97 may be made and all calls  
may be received.  
(see ‘Memory’)  
to press Menu and  
.
To redial the last number called:  
If the caller can be identified (if the network  
supports this function), the caller’s phone  
number (or the name, if it is stored in the  
memory) appears on the display together with  
the text CALLING.  
Press  
twice.  
International Calls  
Note: This function is operational only if the  
local network supports it. Check with the  
network service operator.  
Note: This function, which enables the caller to  
be identified, is operational only if the local  
network supports it. Check with the network  
service operator.  
When calling abroad a + character can be  
inserted in front of the country code instead of  
the international access code.  
If the call is diverted from another number, the  
indicator appears on the right-hand side of  
the third display row. If the caller cannot be  
9
1999 Nokia Mobile Phones. All Rights Reserved.  
 
       
identified and the call is diverted, the message  
DIVERTED CALL appears on the display.  
1-Touch Dialling  
Keys 1-9 dial predefined numbers stored in  
memory locations 1-9. Note: before you can use  
the 1-Touch Dialling function, you must first  
store a number in one of the locations 1-9 and  
make sure you have switched the 1-Touch  
Dialling function On using the phone’s Menu  
Facility (see Menu 4 3).  
Press  
to take the call.  
When you have finished speaking, press  
If you don’t answer the call, the message  
1MISSED CALL appears on the display. If the  
network supports the clock function and  
provides the right time for the phone, the time  
when a call was missed or received can be seen  
similarily like the number of that call. To check  
the time:  
.
Note: store the voice mailbox number into  
memory location 1 (see Menu 1 4 1), if you wish  
to use 1-Touch Dialling function for listening  
your voicemail messages. The memory location  
1 can be used only for listening voicemail  
messages when the 1-Touch Dialling function is  
used.  
Press  
mode.  
to switch your phone into alpha  
During the call, the  
on.  
indicator will remain  
Last Number Redial  
Adjusting The Earpiece Volume  
The volume of the earpiece can be  
adjusted with the toggle key on  
the side of the phone.  
The phone automatically stores the last 10  
numbers (and associated names) that you have  
called or tried to call. To scroll the 10 numbers  
last called:  
Press  
Press  
Press  
to clear the display.  
. The last number called appears.  
or  
to scroll through the  
other nine last numbers called.  
Press  
displayed.  
to make a call to the number  
Lowest volume  
Highest volume  
Note: In Menu 0 0 3 you can select (ERASE ALL  
RECENT CALLS) if you want the last numbers  
called to be cleared from the memory.  
Any Key Answering  
The phone is equipped with an any key  
answering option (press any key except  
to  
Keypad Locked  
The phone’s keypad can be locked to prevent  
accidental keypresses, e.g. when the  
phone is in your pocket.  
answer a call). If you receive an incoming call  
at the same time as you are keying in a number,  
the any key answering feature becomes active  
after the first ringing tone. Any key answering is  
not active when the keypad is locked.  
Note: When the keypad is locked, calls may be  
possible to the emergency number  
preprogrammed into your phone (e.g., 112 or  
some other official emergency number).  
10  
1999 Nokia Mobile Phones. All Rights Reserved.  
 
         
To lock the keypad:  
Press Menu and  
Muting The Microphone  
The muting feature allows you to switch off the  
phone’s microphone, so you can have a private  
conversation with other people during a call.  
.
To unlock the keypad:  
Press Unlock and  
.
Press the Menu selection key and hold it down  
briefly to mute the microphone. The MUTED  
message is shown. Press and hold the Menu key  
again to unmute the microphone. MUTE OFF is  
shown. The call can then be continued in the  
usual way.  
The KEYPAD LOCKED message appears on the  
display. When any key is pressed the Press  
Unlock and then * message is shown.  
To answer a call when the keypad is locked,  
press  
.
During a call, the keypad is not locked, and you  
can operate the phone as usual. When the  
keypad is unlocked, the KEYPAD ACTIVE message  
appears, and the phone starts to operate in the  
usual way.  
11  
1999 Nokia Mobile Phones. All Rights Reserved.  
 
 
3. The Memory  
The phone has 97 standard memory locations  
which allow you to store information as follows:  
(before the ABC indicator flashes). If the  
character displayed is not the character you  
want, press the key again (before the ABC  
indicator flashes) and if you still don’t have  
the character you want, press the key a third  
time (before the ABC indicator flashes).  
If you miss the letter you want, press the key  
repeatedly until the letter you require  
reappears.  
Phone numbers of up to 30 digits each  
Names of up to 20 letters each  
Numbers and letters cannot be displayed at the  
same time. You can switch between numerical  
and alpha modes by pressing  
.
Memory location 99 stores the phone’s own  
number and a welcoming message (max. 20  
letters). You can change the number and edit  
the welcoming message (see the section  
‘Storing Information’) .  
Note: rapid key presses may activate other  
characters.  
Select further letters in the same way.  
You can select upper case or lower case letters  
by pressing and holding the key for a few  
seconds. Additional characters can be displayed  
(by repeatedly pressing the key) as follows:  
Memory location 98 holds the phone’s number  
with a country code prefix. The location cannot  
be edited.  
Memory location 00 is the so-called scratchpad  
memory (see ‘Scratchpad Memory’) where you  
can store information temporarily during a call.  
This 00 memory location is cleared when the  
phone is switched off.  
1-key - ? ! 1 , . : “ ‘ $ £ ( ) / % @  
2-key A B C 2 Ä Å à AE Ç  
3-key D E F 3 è É  
4-key G H I 4 ì ¡  
5-key J K L 5  
Memory location 0 is for the last number called.  
When the phone is locked, calls may be possible  
to the emergency number preprogrammed into  
your phone (e.g., 112 or some other official  
emergency number).  
6-key M N 6 Ñ  
7-key P R S 7 ß  
8-key T U V 8 Ü ù  
9-key W X Y 9  
Also, calls to the numbers in memory locations  
94, 95, 96, and 97 may be made and all calls  
may be received.  
0-key O Q Z 0 Ö Ø ò  
#-key a blank space  
*-key * +  
Keying In Names  
Press  
. The ABC indicator will appear on  
the display indicating that the phone is in  
the alpha mode and that when you press a  
key, letters will appear instead of numbers.  
Exit letter selection by pressing  
again.  
Storing Information  
Select the key labelled with the letter you  
want. Each key is labelled with three letters,  
except for the MN 6 key, so press the key  
labelled with the letter you want once  
Key in the area code and number and, (in the  
alpha mode) the name (or key in first the  
name and then the number).  
12  
1999 Nokia Mobile Phones. All Rights Reserved.  
 
     
Press Memory, Save. The phone will ask you  
to specify a memory location number SAVE  
IN LOCATION.  
Or:  
Press and hold  
to clear the display.  
Press Memory, Save, Save. The phone will  
ask you to specify a memory location number  
Location to be erased:  
Press OK if you want the information stored  
in the first available memory location.  
Otherwise, key in a memory location number.  
Key in the number of the memory location you  
want to clear and press Erase. The message  
ERASE ? and the name or number and the  
memory location number will appear.  
The message SAVED will appear on the display,  
confirming that the information has been  
stored in the memory location specified.  
Press Erase. The message ERASED will be  
displayed briefly, confirming that the  
memory location has been cleared.  
If you try to store only a name or a number, the  
phone asks for the missing name or number.  
Key the required name or number in, and  
confirm it by pressing Save, OK. If you don’t  
wish to have a name or number, just confirm  
with Save, OK.  
Recalling Information By Memory  
Location Number And By Name  
Press Memory.  
If you try to store information in a memory  
location that is already being used or with a  
name that is already being used, the phone will  
display the memory location number and the  
REPLACE? message text.  
Key in the name or its first letters.  
Press Find. A list of names appears.  
You can scroll through the list with the  
If you want to replace the existing information,  
press OK.  
and  
keys.  
Press Options to get the following options:  
Move, Show, Edit, Erase.  
If you do not want to replace the existing  
information, either press  
or Quit. The  
You can scroll through the list with the  
information you tried to store will then reappear  
on the display, and you can store it in a different  
memory location or with a different name, as  
described above.  
and  
keys.  
Press Show to view the number stored with  
the name.  
Or:  
Clearing Information  
Press Memory.  
Press Memory,  
, Find. The phone asks  
you to specify the memory location with the  
message Location number:  
Key in the name or its first letters.  
Press Find to get the name on the display.  
Key in the memory location number, (e.g. 2)  
and press Find. The telephone number stored  
in the memory location will appear on the  
display.  
Press Options, Erase. The message ERASE ?  
and the name or number and the memory  
location number will appear.  
Press ABC if you want to check the name  
stored with the number.  
Press Erase. The message ERASED will be  
displayed briefly, confirming that the  
memory location has been cleared.  
13  
1999 Nokia Mobile Phones. All Rights Reserved.  
 
   
(If no name was stored with the number, the  
display will be blank). Press again if you  
want to return to the number display.  
Scratchpad Memory  
In addition to its 97 permanent memory  
locations, the phone has one short-term  
memory location (00), where a telephone  
number (and a name ) keyed in during a call is  
temporarily stored. The number is cleared from  
memory when the phone is switched off.  
Call the number by pressing  
.
Scanning For A Number  
To scan the entire memory, use the  
keys to display the contents of the  
or  
Key in a number (or a name in alpha mode)  
during a call. The phone will automatically  
store the number or name in the scratchpad  
memory location when you end the call. Any  
information previously stored in the  
memory locations in use. If you have just  
recalled a memory location by number, the  
scanning will start from that memory  
location.  
scratchpad memory will be lost.  
Whenyoufindthenumberyouwant,press  
to make the call.  
To move a number from the scratchpad memory  
location to a permanent memory location, recall  
it: 00 Memory, Find. Store the information as  
described in Storing Information.  
Scanning For A Name  
(When the location 00 is not in use, the phone’s  
SIS security reference code can be checked  
there. The reference code is used by the NMT  
network to register your phone.)  
Press  
.
Press  
to display the first and  
to  
display the last name in alphabetic order. To  
display the other stored names, press the  
arrow keys until you find the name you are  
looking for.  
Number Of The Phone  
To check the number of your phone:  
Key in 99(memory location where the phone  
number is stored).  
Press Memory, Find.  
14  
1999 Nokia Mobile Phones. All Rights Reserved.  
 
       
4. The Menu Facility  
The menu allows you to check and change the  
settings for certain functions, e.g. whether they  
are currently switched on or off. You can scroll  
The Menu Shortcut  
Press the Menu selection key.  
through the menu with the  
enter a function or to use a shortcut by pressing  
the Menu key and number of the desired menu  
or  
keys to  
Press the number of the desired menu.  
For example, to enter Menu 0, press Menu and  
then 0. Similarily, to enter the submenu 0 1,  
you can press Menu and then keys 0 and 1.  
(see instructions below).  
Note: in Menu functions 0, 1, 2, 3, 4 and 6 you  
can enter the submenus by using the shortcut,  
i.e. by pressing the number of the submenu  
option.  
The Menu Method  
Press the Menu selection key.  
Use either  
or  
keys to scroll forward  
See the picture on the following page for a list  
of menus and submenus.  
or backward through the list of functions  
until you find the one you want.  
Press Select when you reach the function  
you wish to activate.  
Use  
or  
to check the current setting  
of the function or to scroll through  
submenus.  
Select the setting you wish to change with  
the Select key. Use  
through the options.  
or  
to scroll  
Press the OK selection key to store the new  
setting in memory (the one which is shown  
on the dark background).  
You can press the Quit selection key, at any  
time, to quit the menu function and go back to  
the previous Menu level.  
Note: if you choose not to change any setting,  
you can exit the Menu function with the Quit  
or  
keys.  
15  
1999 Nokia Mobile Phones. All Rights Reserved.  
 
     
Menu 0 CALL REGISTER  
0 RECENT CALLS  
1 CALL DURATION  
0 DIALLED CALLS  
1 RECEIVED CALLS  
2 MISSED CALLS  
3 ERASE ALL RECENT  
CALLS  
0 LAST CALL  
1 OUTGOING CALLS  
2 INCOMING CALLS  
3 RESET COUNTERS  
Menu 1 MESSAGES  
0 READ MESSAGES  
1 WRITE MESSAGES  
2 LISTEN TO VOICE  
MESSAGES  
3 RETRIEVE MESSAGES  
4 MESSAGE SETTINGS  
0 MESSAGE CENTRE  
NUMBER  
1 VOICE MAILBOX  
NUMBER  
2 ENCRYPTION KEY  
3 ENCRYPTION  
Menu 2 PHONE SETTINGS  
0 COUNTRY  
1 LIGHTS  
2 KEYPAD TONES  
3 LANGUAGE  
4 BATTERY CARE  
5 CLOCK  
Menu 3 SECURITY OPTIONS  
0 PHONE LOCK  
1 CHANGE LOCK CODE  
2 CALL BARRING  
Menu 4 CALL SETTINGS  
0 RINGING TONE  
1 RINGING VOLUME  
2 CALL ALERT  
3 1-TOUCH DIALLING  
4 AUTOMATIC ANSWER  
Menu 5 SEND DTMF TONES  
Menu 6 ALARM OPTIONS  
0 COUNTDOWN TIMER  
1 ALARM CLOCK  
Menu 7 PREFIX EDITOR  
16  
1999 Nokia Mobile Phones. All Rights Reserved.  
 
network features, rounding-off for billing, and  
so forth.  
Menu Functions  
You can enter all the Menu functions described  
on the following pages in the same way as in  
examples CALL REGISTER (Menu 0) or  
MESSAGES (Menu 1).  
Messages (Menu 1)  
Your phone can also be used for sending and  
receiving SMS messages. This function is a  
network service and operational only if the  
network supports it.  
Call Register (Menu 0)  
With Menu function 0, you can get information  
about your recent calls and their duration.  
indicates that an SMS message has been  
received.  
Press Menu 0 to enter the Call Register Menu.  
Scroll between submenus (Recent Calls and  
Read Messages (Menu 1 0)  
Call Duration) with the  
and  
keys.  
To read a message:  
Press Select key to enter the desired  
submenu.  
Press Menu 1 0 to enter  
the ‘Read messages’ submenu 1 0.  
To leave the Menu function, press Quit.  
A new message or the last received message  
is shown on the display. Use the  
keys to read the message.  
and  
Recent Calls (Menu 0 0)  
With Menu function 0 0 you can view the  
automatically stored numbers of all dialled,  
received and missed calls and you may choose to  
clear all these numbers from the phone’s memory.  
With Options selection key you get a list  
(Send, Read next, Erase, Reply, Use number,  
Edit). Use the  
and  
keys to scroll  
through these options.  
Scroll through the submenus (Dialled Calls,  
Received Calls, Missed Calls, Erase All Recent  
To select an option, e.g. to Erase a message,  
press OK selection key.  
Calls) with the  
desired setting.  
and  
to accept the  
Press Quit to exit the function.  
If you want to reply to a message use the Reply  
option, under Options selection key. You can  
also use the ‘Use number’ option to store the  
number in memory if you wish to reply later.  
Press Select to list or clear all recent calls.  
To leave the Menu function, press Quit.  
Call Duration (Menu 0 1)  
If the  
indicator is flashing, there is no space  
for new messages. For more space, erase old  
messages as described above.  
With Menu function 0 1 you can check the  
duration of your calls and reset the call counters.  
Scroll through the submenus (Last Call,  
Outgoing Calls, Incoming Calls, Reset  
Write Messages (Menu 1 1)  
Counters) with the  
and  
keys.  
To write and send a message:  
Note: To reset the counters you need the four-  
digit security code, which is included in the sales  
package.  
Press Menu 1 1 to enter  
the ‘Write messages’ submenu 1 1.  
Write the message. It can be a maximum of  
160 characters.  
Note: the actual time invoiced for calls by your  
service provider may vary, depending upon  
17  
1999 Nokia Mobile Phones. All Rights Reserved.  
 
             
With Options selection key you get a list  
If the voice mailbox number is not stored in the  
phone’s memory, a message NO VOICE MAILBOX  
NUMBER will appear on the display. Use  
submenu 1 4 1 to store the voice mailbox  
number.  
(Save, Send, Erase). Use the  
and  
keys  
to scroll through these options.  
To select an option, e.g. to Send a message,  
press the OK selection key.  
The phone will ask for recipient’s number  
(Number:).  
Retrieve Messages (Menu 1 3)  
This menu function is needed only when you are  
in a country where the local network operator  
does not support the SMS. It allows you to  
retrieve your SMS messages from your own  
operator’s service centre by placing a call to  
your home systems centre.  
Use the  
and  
keys if you wish to get  
a number from the phone’s memory.  
With the OK selection key the selection keys  
Own and Other appear on the display.  
Press Own key if you want the phone to use  
your own message centre number, which  
was stored in menu 1 4 0.  
Press Menu 1 3 to enter the ‘Retrieve  
messages’ submenu.  
Press Other if you want to key in other  
message centre number. This number can  
also be retrieved from the memory, if it was  
stored there.  
After successful retrieval of a message, the  
indicator appears on the display.  
If the message RETRIEVAL FAILED appears on the  
Note: if you use a message centre other than  
yours, the encryption is automativally  
deactivated and later activated again. (see  
Menus 1 4 2 - 1 4 3).  
display, you can try to retrieve messages later.  
If there are no messages in the SMS service  
centre, the NO MESSAGES text appears on the  
display.  
When writing the message you can use the  
following:  
Message Settings (Menu 1 4)  
the  
alpha modes  
-key to delete characters  
-key to insert a space and  
-key to switch between numeric and  
Message Centre Number (Menu 1 4 0)  
To send or retrieve SMS messages you must key  
in the message centre number by using this  
submenu. Your network operator provides you  
with the message centre number when you  
subscribe to the SMS (Short Message Service).  
and  
left or right.  
keys to move the cursor to the  
The  
indicator shows the place which you  
Press Menu 1 4 0 to enter the ‘Message  
centre number’ submenu.  
are currently editing when you are writing a  
message.  
Key in the phone number of the message  
centre.  
Listen To Voice Messages (Menu 1 2)  
Note: This function is operational only if the  
local network supports it. Check with the  
network service operator.  
Press the OK selection key.  
Voice Mailbox Number (Menu 1 4 1)  
With this menu function you can call your voice  
mailbox and listen to your voice messages.  
If you wish to use Menu 1 2 (to listen to the  
messages left in your voice mailbox or to clear  
the  
indicator from the display) you have to  
Press Menu 1 2 to enter the ‘Listen to  
voicemessages’ submenu.  
18  
1999 Nokia Mobile Phones. All Rights Reserved.  
 
         
store the voice mailbox number in the phone’s  
memory by using this submenu function.  
Phone Settings (Menu 2)  
Press Menu 1 4 1 to enter the ‘Voice  
mailbox number’ submenu.  
Country (Menu 2 0)  
There are 18 selectable country codes in the  
phone’s memory. If you go to another country  
using the NMT network and wish to use your  
phone there, you must select the correct  
country code (FI, NO, SE, DK, etc.).  
Key in the voice mailbox number provided by  
the local network operator.  
Press the OK selection key.  
Encryption Key (Menu 1 4 2)  
To change the country code:  
With this menu function you can enter the  
encryption key which is used during SMS. To  
ensure the proper functioning of the SMS, you  
must enter the encryption key, if your network  
operator provides you with one when you  
subscribe to the SMS.  
Press 2 0 to enter the Country submenu.  
The phone will display the code it is currently  
using.  
Use the  
and  
keys to select a new  
code from the list.  
Press OK to confirm a setting.  
(Note: not all operators provide a key; some use  
the key preprogrammed into your phone, in  
which case you will not need a separate  
encryption key).  
Setting The Lights On/Off (Menu 2 1)  
The phone’s keypad and display are fitted with  
lights to make them easy to read.  
If your operator provides you with a key:  
Press Menu 1 4 2 to enter the ‘Encryption  
key’ submenu.  
Keypad Tones (Menu 2 2)  
You hear a key tone each time you press a key.  
You can select a key tone you prefer or to turn  
the key tones off.  
Enter the ten-digit encryption key  
provided by the network operator.  
Press the OK selection key.  
Note that when the key tones are switched off,  
DTMF tones can still be sent. Also note that  
when you have switched off the ringing tone no  
key tones will be heard either.  
If your operator has not provided you with the  
key and your phone uses a preprogrammed key,  
enter * with Menu 1 4 2.  
Encryption (Menu 1 4 3)  
Language Select (Menu 2 3)  
This menu function enables you to select  
encryption On or Off by using Select and the  
arrow keys.  
You can select a language for the display texts.  
Battery Care (Menu 2 4)  
You can switch the phone’s battery care On or  
Off. When it is switched On, the battery will be  
prevented from charging continuously.  
When the battery capacity has decreased to the  
shutdown level, the setting changes  
automatically to the BATTERY CARE OFF state  
and charging can begin again once the phone is  
connected to a charger.  
19  
1999 Nokia Mobile Phones. All Rights Reserved.  
 
               
Clock (Menu 2 5)  
Change Lock Code (Menu 3 1)  
This menu function allows you to check the time  
on your phone, but only if the network supports  
the function. Time is shown on the third display  
row when the phone is in idle mode, conversation  
mode or when the phone’s keypad is locked.  
To change the lock code of your phone:  
Press Menu 3 1 to enter the Change Lock  
Code submenu. The phone asks you to key in  
the five-digit security code supplied by your  
dealer (Security code:).  
Enter Menu 2 5 and use the  
to switch the function On or Off.  
and  
keys  
Key in the security code and press OK.  
If you keyed in an incorrect code, the message  
CODE ERROR appears. After you have given the  
correct security code, the phone asks you to key  
in the new lock code (Enter new lock code:).  
Security Options (Menu 3)  
Phone Lock (Menu 3 0)  
Key in the new four-digit lock code and press  
The phone has an easy-to-use security system. It  
can be locked by using a four-digit lock code to  
prevent unauthorised use. If you forget your lock  
code, you can change it by using the Menu 3 1  
function.  
OK.  
The code must only consist of digits: other  
characters (e.g. *, #) and letters are not allowed.  
The message SAVED will appear to confirm that  
the new lock code has been set.  
Note: to change the lock code, you must know  
the security code supplied by your dealer. When  
the phone is locked, calls may be possible to the  
emergency number preprogrammed into your  
phone (e.g. 112 or some other official  
emergency number).  
Call Barring (Menu 3 2)  
This menu function restricts calls to certain,  
selected numbers, e.g. international calls.  
You need to know the phone’s five-digit security  
code to activate the function.  
Also, calls to the numbers in memory locations  
94, 95, 96, and 97 may be made and all calls  
may be received. Access to memory is also  
prevented.  
Press 3 2 to enter the Call Barring submenu.  
The options Activate, Cancel and Status will  
appear on the display. The phone asks you to  
key in the security code (Security code:).  
To lock the phone:  
Press Menu 3 0 to enter the PHONE LOCK  
submenu. The options Activate, Cancel,  
Status will be displayed. The phone will ask  
you to key in the lock code (Enter lock code:)  
if you choose options Activate or Cancel.  
Key in the security code and press OK.  
The phone asks you to enter the area code or  
prefix of a phone number you want to be  
barred (Number:).  
Key in the number and press OK.  
Key in the four-digit code. It will appear on  
the display as four stars.  
The options Activate, Cancel and Status  
appear on the display.  
Press OK.  
Use the  
and  
keys to select the  
If you keyed in an incorrect code, the message  
CODE ERROR appears. To exit the function, press  
or Quit. Unlocking the phone is carried out  
as described above.  
appropriate option and press OK to accept  
the option.  
The option Status shows the currently barred  
numbers (BARRING ACTIVE ON NUMBERS:)  
20  
1999 Nokia Mobile Phones. All Rights Reserved.  
 
         
You can enter several, maximum of 30 numbers,  
a short beep. The messageSILENT is displayed in  
at the same time. Press  
different numbers.  
to separate the  
standby mode.  
Note: The vibrating options operate only when a  
vibra battery is used.  
For example, 990*9700 restricts the calls to any  
numbers beginning with 990 and 9700.  
1-Touch Dialling (Menu 4 3)  
Note: when calls are barred, calls may be  
possible to certain emergency numbers in some  
networks (e.g., 112 or some other official  
emergency numbers).  
You can enable the 1-9 keys to make a call to a  
number stored in one of those particular  
memory locations. When the 1-Touch Dialling is  
selected as On, you can call a number in memory  
locations 1-9 simply by pressing the desired  
number key.  
Note: If you wish to use the 1-Touch Dialling  
function for listening your voice mail, you have  
to store the voice mailbox number into the  
memory location 1 and select the 1-Touch  
Dialling as On. Then you can call your voice  
mailbox number by pressing and holding  
number 1. You can use memory location 1  
together with 1-Touch Dialling only for  
checking voicemail messges.  
Call Settings (Menu 4)  
With submenus 4 0- 4 4 you can select  
different call settings, such as ringing tone,  
ringing volume, call alerting type and dialling  
and answering modes.  
Ringing Tone (Menu 4 0)  
The phone is provided with 12 types of ringing  
tones. To select the tone you like best, scroll  
between different ringing tone types with keys  
and  
. Use OK selection key to select the  
Automatic Answer (Menu 4 4)  
ringing type you prefer.  
This function is used in connection with a  
headset and with the Handsfree-facility of the  
carkit. You can select the automatic answer to  
be either On/ Off with the Select key.  
Ringing Volume (Menu 4 1)  
You will hear the ringing tone when there is an  
incoming call. There are 4 different levels of  
tone volumes you can choose from.  
Note: if the SILENT SERVICE function is On,  
AUTOMATIC ANSWER function is not available.  
Call Alert (Menu 4 2)  
Send DTMF Tones (Menu 5)  
You can transmit numeric data as a series of  
tones, for example, to check your answering  
machine.  
This allows you to select the desired type of alert  
from the following options:  
Ring & Vibr.: Ringing tone normal and with the  
vibrator.  
You can either send DTMF (Dual Tone Multi  
Frequency) tones through the phone’s DTMF  
tone generator, or you can use the MFT service  
of the NMT system. Sending DTMF tones by the  
MFT service is more reliable in poor transmission  
conditions.  
Ringing: Only the ringing tone is active.  
Vibrate: Only the vibrator is active, all ringing  
tones are inactive.  
Silent: All tones are turned off, only the lights  
blink and a message indicating a call appears on  
the display during an incoming call and there is  
21  
1999 Nokia Mobile Phones. All Rights Reserved.  
 
             
I Manual DTMF Dialling  
When you store the DTMF numbers in the  
memory, you can add pause characters in the  
middle of the string of digits. It may be that your  
answering machine requires a pause between  
your password and the code for “play messages”.  
Make the call in the usual way (see ‘Making  
a Call’).  
Key in the numbers onto the display. Each  
number is sent directly as a DTMF tone. The  
length of the tone depends on how long you  
press the key.  
To create a pause of 2.5 seconds in the string,  
press the  
key three times (shown as p on  
the display).  
II Manual DTMF Dialling through the MFT Service  
Make the call in the usual way.  
Alarm Options (Menu 6)  
Press Menu 5 to select the MFT service. The  
D indicator will appear on the display.  
Countdown Timer (Menu 6 0)  
Key the numbers onto the display. Each  
number is directly sent as a DTMF tone. The  
D indicator flashes as each tone is sent.  
This menu function is a personal reminder. After  
a certain period of time, determined as  
described in steps 1-4 , you will hear an alerting  
tone and the message COUNTDOWN TIME UP!  
appears on the display.  
Press the Stop selection key to switch off the  
MFT service.  
III Automatic DTMF Dialling through MFT  
Service  
To set the countdown timer:  
Press Menu 6 0. Activate, Cancel and Status  
will appear on the display.  
This feature allows you to recall a number from  
a memory location and send it as a complete  
number. (Check that you have the number  
stored in the memory).  
Press OK to select an option. The message  
’Set timer:’ appears.  
Make the call in the usual way.  
Use the number keys to set the desired  
countdown time.  
Press Memory, Find to recall the number  
from the memory location. Or use the  
Press OK to accept the set countdown time.  
and  
keys to scroll through the memory  
To stop the phone alerting and to clear the  
message from the display after the countdown  
time is up:  
locations until you find the right number.  
Press Quit.  
Press Menu 5 to activate the MFT service.  
The number stored in the memory location is  
automatically sent as DTMF tones (the D  
indicator flashes during transmission.)  
Press the OK key.  
With the ‘Status’ option, you can check if the  
timer alarm is set and how much countdown  
time is left.  
If the D indicator remains on after the  
transmission, use the Stop selection key to  
return to normal operation.  
Alarm Clock (Menu 6 1)  
You can set the alarm on your phone, if it gets  
the right time from the local NMT 450. To set  
the alarm:  
You cannot speak into the phone when the MFT  
service is on. Even if the keytones are turned off,  
the DTMF tones can still be sent.  
Press Menu 6 1. Activate, Cancel and Status  
will appear on the display.  
Placing a Pause between DTMF Tone Strings.  
22  
1999 Nokia Mobile Phones. All Rights Reserved.  
 
     
Press OK to select an option. The message  
’Set alarm time:’ appears.  
Prefix Editor (Menu 7)  
A number prefix can be added with the front  
editor, which enables the user to add numbers  
to the beginning of the phone number. Numbers  
will be modified starting at the cursor location.  
Use the number keys to set the desired alarm  
time.  
Press OK to accept the set time.  
Recall number from shortcode memory  
location: Press Memory, Find.  
To stop the phone alerting and to clear the  
message ALARM! from the display after the  
alarm time is up:  
Press Quit.  
Press the OK key.  
Start the front editor by pressing Menu 7.  
With the ‘Status’ option, you can check if the  
timer alarm is set and what time will the alarm  
time be up.  
Use the  
key to delete the numbers from  
the beginning of the displayed number.  
Add the desired numbers by keying them  
onto the display.  
If the network does not provide the time to your  
phone, a message TIME NOT AVAILABLE appears  
on the display when you try to set the alarm  
time.  
If you leave the Menu function with the Quit  
key, the display will be cleared. The OK key will  
return to the normal editing mode.  
Note: the alarm time will be stored into phone’s  
memory and if the ALARM CLOCK function is  
activated, the phone will alert again at the same  
time next day.  
23  
1999 Nokia Mobile Phones. All Rights Reserved.  
 
 
Care and Maintenance  
Important Safety Information  
Your phone is a product of superior design and  
craftsmanship and should be treated with care.  
The suggestions below will help you to fulfill any  
warranty obligations and to enjoy this product  
for many years.  
Traffic Safety  
Do not use a hand-held telephone while driving  
a vehicle. If using a hand-held phone, park the  
vehicle before conversing. Always secure the  
phone in its holder; do not place the phone on  
the passenger seat or where it can break loose  
in a collision or sudden stop.  
Keep the phone and all its parts and accessories  
out of the reach of small children’s.  
Keep the phone dry. Precipitation, humidity, and  
liquids contain minerals that will corrode  
electronic circuits.  
The use of an alert device to operate a vehicle’s  
lights or horn on public roads is not permitted.  
Remember, road safety always comes first!  
Do not use or store the phone in dusty, dirty  
areas; its moving parts can be damaged.  
Operating Environment  
Do not store the phone in hot areas. High  
temperatures can shorten the life of electronic  
devices, damage batteries, and warp or melt  
certain plastics.  
Remember to follow any special regulations in  
force in any area and always switch off your  
phone whenever it is forbidden to use it, or  
when it may cause interference or danger.  
Do not store the phone in cold areas. When the  
phone warms up (to its normal temperature),  
moisture can form inside the phone, which may  
damage electronic circuit boards.  
Operation of any radio transmitting equipment,  
including cellular phones, may interfere with  
the functioning of inadequately protected  
medical devices. Consult a physician or the  
manufacturer of the medical device if you have  
any questions. Other electronic equipment may  
also be subject to interference.  
Do not attempt to open the phone. Non-expert  
handling of the phone may damage it.  
Do not drop, knock or shake the phone. Rough  
handling can break internal circuit boards.  
As with other mobile radio transmitting  
equipment, users are advised that for the  
satisfactory operation of the equipment and for  
the safety of personnel, it is recommended that  
the equipment should only be used in the  
normal operating position.  
Do not use harsh chemicals, cleaning solvents,  
or strong detergents to clean the phone. Wipe it  
with a soft cloth slightly dampened in a mild  
soap-and-water solution.  
If the phone or any of its accessories are not  
working properly, take them to your nearest  
qualified service facility. The personnel there  
will assist you, and if necessary, arrange for  
service.  
Users are advised to switch off the phone when  
at a refuelling point (service station). Users are  
reminded of the need to observe restrictions on  
the use of radio equipment in fuel depots (fuel  
storage and distribution areas), chemical plants  
or where blasting operations are in progress.  
Do not store or carry flammable liquids, gases or  
explosive materials in the same compartment as  
the phone, its parts or accessories.  
24  
1999 Nokia Mobile Phones. All Rights Reserved.  
 
   
Only qualified personnel should install or service  
the phone in a vehicle. Faulty installation or  
service may be dangerous and may invalidate  
any warranty which may apply to the unit.  
If certain features are in use (Keyguard, Locking,  
Call Barring, etc.), you may first need to turn  
those features off before you can make an  
emergency call. Consult this document and your  
local cellular service provider.  
Electronic fuel injection systems, electronic  
anti-skid braking systems, electronic cruise  
control systems and other electronic systems  
can malfunction due to a lack of protection  
from radio signals. Check regularly that all  
cellular phone equipment in your vehicle is  
mounted and operating properly.  
When making an emergency call, remember to  
give all the necessary information as accurately  
as possible. Remember that your cellular phone  
may be the only means of communication at the  
scene of an accident - do not cut off the call  
until given permission to do so.  
Switch off your cellular phone when in an aircraft.  
The use of cellular telephones in an aircraft may be  
dangerous to the operation of the aircraft, disrupt  
the cellular network and is illegal.  
Troubleshooting  
If the power does not come on or stay on: Make  
sure the battery is properly installed in the  
phone. Make sure the contacts are clean on the  
battery and the charging stand. The battery  
charge may be too low for operation. Listen for  
the low battery warning tones. If the power  
comes on but the phone does not work: check  
Failure to observe these instructions may lead to  
suspension or denial of cellular telephone  
services for the offender, or legal action or both.  
Emergency Calls  
This phone, like any cellular phone, operates  
using radio signals, cellular and landline  
networks, as well as user-programmed  
the O and  
indicators; you might be out of  
the cellular service range.  
functions which cannot guarantee connection  
in all conditions. Therefore, you should never  
rely solely upon any cellular phone for essential  
communications (e.g. medical emergencies).  
Remember, to make or receive any calls the  
phone must be switched on and in a service area  
with adequate cellular signal strength.  
Emergency calls may not be possible on all  
cellular phone networks or when certain  
network services and/or phone features are in  
use. Check with local cellular service providers.  
To make an emergency call:  
If the phone is not on, switch it on.  
Press and hold the  
key for several  
seconds to ready the phone for calls.  
Key in the emergency number for your  
present location (e.g. 112 or some other  
official emergency number).  
Emergency numbers vary by location.  
Press the  
key.  
25  
1999 Nokia Mobile Phones. All Rights Reserved.  
 
   

Miele Cooktop KM5600 User Manual
Milan Technology Switch MIL S501MT 15 User Manual
Multi Tech Equipment Modem ISIHI 2S User Manual
NeumannBerlin Microphone U 47 User Manual
Northern Industrial Tools Welding System ST80i User Manual
Oki Fax Machine OF5800 User Manual
Oki Printer 16n User Manual
Omnimount TV Mount 1004164 User Manual
Panasonic Electric Shaver ES881 User Manual
Panasonic Vacuum Cleaner MC 4500 User Manual