NETGEAR Network Router D500 User Manual

1. Connect the modem router  
to the Internet.  
3. Connect a computer.  
Installation  
Use an Ethernet cable to  
connect your computer to a  
yellow Ethernet port on the  
modem router.  
You can connect the  
modem router either to a DSL  
service or to a cable or fiber  
modem.  
You can also use WiFi to connect.  
To connect with WiFi, use the  
WiFi network name and password  
on the product label.  
To connect the modem router  
to a DSL service:  
DSL Internet  
N150 WiFi DSL Modem Router—Essential Edition  
Model D500  
a. Install an ADSL microfilter  
between the phone line and  
the phone.  
b. Use a phone cable to  
connect the microfilter to  
the gray ADSL port on the  
modem router.  
For additional information about  
connecting to a DSL service, see  
the other side of this installation  
guide.  
N300 WiFi DSL Modem Router—Essential Edition  
Model D1500  
4. Log in to the modem router.  
Launch a web browser.  
NETGEAR genie displays.  
Line  
Cable or fiber Internet  
Package Contents  
ADSL microfilter  
If you do not see genie:  
In the address field of the  
web browser, enter www.  
routerlogin.net. When  
prompted, enter admin for the  
user name and password for the  
password.  
Phone cable to ADSL  
ADSL microfilter  
(varies by region)  
Ethernet cable  
to LAN2/WAN  
To connect the modem router  
to a cable or fiber modem:  
Use an Ethernet cable to  
5. If you connected the  
modem router to a cable or  
fiber modem in Step 1, change  
the default connection  
connect the cable or fiber  
modem to the yellow LAN2/  
WAN port on the modem router.  
Cable or fiber modem  
Modem router  
Modem router  
(N300 shown)  
2. Power on the modem router.  
method in NETGEAR genie.  
Connect the power adapter to  
the modem router and plug it  
into an electrical outlet.  
a. Select ADVANCED > Setup  
Power adapter  
> WAN Setup.  
b. From the WAN Preference  
menu, select Must use  
Ethernet WAN.  
Wait for the Power LED  
light green.  
to  
If the Power LED does not  
c. Click the Apply button.  
light, press the Power On/Off  
Phone cable  
Ethernet cable  
Power adapter  
button.  
(varies by region)  
 

Miele Washer W3722 User Manual
Moxa Technologies Video Game Console UC 7122 User Manual
Multiquip Portable Generator DCA45USI2 User Manual
Multi Tech Systems Computer Hardware ISI5634PCI 4 8 User Manual
National Instruments Switch DIO 6533 User Manual
NEC Flat Panel Television M40 2 AVT User Manual
NordicTrack Home Gym NTEL42550 User Manual
Onkyo Speaker System Ls 3100 User Manual
Optiview Security Camera MC420 User Manual
Panasonic Camcorder AG AC130A User Manual