Murphy Automobile Parts M2582 P User Manual

PV-94129B  
Revised 04-00  
Catalog Section 55  
(00-02-0126)  
Pneumatic Valves for  
Fuel Gas Shutoff  
Models M2582-P  
and M5180-P  
Pneumatically Open and Shut Off Fuel Gas  
Automatically or Semi-automatically  
Pneumatic Control Pressure Can Be  
Air, Gas or Oil  
Models for 2 in. or 1 in. (51 mm or  
25 mm) Fuel Gas Lines  
MURPHY  
MATIC  
Model M2582-P  
®
bar] and fully opens the seat at 3 psi (21 kPa) Control Pressure (Maximum):  
Description  
[.21 bar]. The valve can be manually opened  
with lever and latched against inlet pressure  
of 100 psi (689 kPa) [6.89 bar]. The latch will  
release after pilot pressure reaches 2.5 psi (17  
kPa) [.17 bar].  
M2582-P: 75 psi (517 kPa) [5.17 bar]  
The M2582-P and M5180-P are pneumatical-  
ly controlled fuel shut-off valves that open  
and close automatically or semi-automatical-  
ly. The pneumatic control pressure can be air,  
oil or gas. A manual lever aids in opening the  
valve when control pressure is insufficient. A  
gas escape vent, when properly vented and  
maintained, releases trapped gas from the  
valve after shutoff.  
M5180-P: 80 psig (552 kPa) [5.52 bar]  
How to Order  
To order, use the diagram below.  
Specifications  
Valve Body: Sandcast aluminum  
(alodined for corrosion resistance).  
Optional steel body available on M5180-P  
models only (see How to Order).  
______ – __  
Model  
Basic Operation  
Automatic: As the control pressure/vacuum  
increases the valve will open. When the control  
pressure/vacuum decreases, the valve will close.  
M2582-P  
M5180-P  
Valve Seat: Buna-N  
Valve Inlet Pressure (Maximum):  
M2582-P: 80 psi (552 kPa) [5.52 bar]  
M5180-P: 100 psi (689 kPa) [6.89 bar]  
Semi-Automatic: If the control pressure/vacuum  
is too low and the valve does not open automat-  
ically, it can be opened manually by lifting the  
built-in lever arm and setting the latch. The  
latch resets automatically when control pressure  
rises enough to release it.  
Body  
Blank = Aluminum  
2 = Steel (applies to M5180-P)  
Parts Exposed to Gas Line Flow:  
M2582-P:  
Aluminum  
Warranty  
Buna-N  
M2582-P is for 1 in. (25 mm) gas lines. It auto-  
matically opens at 2 psi (14 kPa) [.14 bar] and  
fully opens the seat at 3 psi (21 kPa) [.21 bar].  
The valve can be manually opened with the  
lever and latch against inlet pressure of 80 psi  
(552 kPa) [5.52 bar]. The latch will release after  
pilot pressure reaches 2.5 psi (17 kPa) [.17 bar].  
A limited warranty on materials and workmanship  
is given with this FW Murphy product. A copy of  
the warranty may be viewed or printed by going to  
302, 303, and 17-7 PH stainless steel  
M5180-P:  
Aluminum (Steel optional)  
Buna-N  
302, 303, 304, and 416 stainless steel  
Control Diaphragm: Flexweave polyester  
fabric and Buna-N elastomer.  
The M5180-P is for 2 in. (52 mm) gas lines.  
It automatically opens at 2 psi (14 kPa) [.14  
 

Miele Oven H6100BM User Manual
Miller Electric Compact Loader GP30 User Manual
Multi Tech Systems Scanner FF200 User Manual
Nortel Networks Switch NN47200 503 User Manual
NuTone Ventilation Hood NP51000 User Manual
Onkyo Home Theater System LS T10 User Manual
Panasonic Air Conditioner AW PS505 User Manual
Panasonic Portable CD Player CQ C5100W User Manual
Panasonic Radio KX TR320B User Manual
Panasonic Telephone KX T7320 User Manual